User Manual

46
[Display Size] The screen size specified in the “New Project
Wizard” dialog box or the “Add Controller” dialog
box. When you click this, a spin box appears;
you can edit the setting by clicking or by directly
entering a value. When you change the screen
size, the size of previously-placed widgets
changes while maintaining the aspect ratio.
[Open with
Full Screen
Style]
When the controller file is opened or when con-
trol mode is selected, this setting selects
whether it operates in full-screen display (Yes)
or as a window (No).
[Pass Code
Setting]
Selects whether the controller’s pass code
matches the code specified in the “Setup” dia-
log box (Use Project Pass Code) or a code indi-
vidually specified for the controller (Use
Controller Pass Code). If [Use Controller Pass
Code] is selected, the following three items edit-
able.
[Administra-
tor Code]
If you want to set or change the pass code, do
so in the “Setup” dialog box [Security] tab.
[Power User
Code]
[Unlock
Code]
Property Value
[PV Monitor-
ing Service
Setting]
For each controller, this selects whether settings
for ProVisionaire Monitoring Service will use the
settings specified in the “Setup” dialog box
(User Project Setting) or the settings specified in
the controller's properties (Use Controller Set-
ting).
[Destination
PV Monitor-
ing Service]
When [PV Monitoring Service Setting] is set to
[Use Controller Setting], this setting selects
whether ProVisionaire Monitoring Service is
installed on the same computer as KIOSK (This
PC) or on a different computer (Other PC).
[Destination
PV Monitor-
ing Service IP
Address]
When [Destination PV Monitoring Service] is set
to [Other PC], this setting specifies the IP
address of the computer on which ProVisionaire
Monitoring Service is installed.
[Show Widget
Selection
Border]
When the controller file is opened or when con-
trol mode is selected, this setting selects
whether the border showing that a widget is
selected is visible (Yes) or not visible (No).
[Enable File
Operations
for Power
User]
Selects whether a Power User Code must be
entered when opening the file (Yes) or whether
an Administrator Code must be entered when
opening the file (No).
[Enable Menu
Auto-Close]
When ProVisionaire Touch KIOSK is in Control
Mode, this selects whether the menu button in
the upper left automatically closes after a cer-
tain length of time (Yes) or must be closed man-
ually (No).
Property Value