User Manual

Edit Search Utility Live SetPerformance
Normal Part (AWM2) Drum Part Normal Part (FM-X) Common/Audio
MODX Reference Manual
Drum Part Edit
Common
Part Settings
General
Zone Settings
Zone Transmit
Effect
Routing
Ins A
Ins B
EQ
Ins Assign
Arpeggio
Common
Individual
Advanced
Motion Seq
Common
Lane
Mod / Control
Control Assign
Receive SW
Key
Osc / Tune
Filter
Level / Pan
Element EQ
Copying or Exchanging
Drum Keys
135
Reference
Velocity Depth (Velocity Sensitivity Depth)
Determines the degree to which the resulting volume of the tone generator responds to your playing
strength. The higher the value, the more the volume changes in response to your playing strength (as
shown below).
Settings: 0–127
Velocity Offset (Velocity Sensitivity Offset)
Determines the amount by which played velocities are adjusted for the actual resulting velocity effect. This
lets you raise or lower all velocities based on this setting value—allowing you to automatically compensate
for playing too strongly or too softly.
Settings: 0–127
Same as the Element Common Edit parameters for Normal Parts (AWM2) (page 71).
Same as the Element Common Edit parameters for Normal Parts (AWM2) (page 73).
Zone Settings
Zone Transmit
127
0
127
When Offset (below) is set to 64:
Actual resulting
velocity
(affecting the
tone generator)
Velocity with which you play a note
Depth=127
Depth=64
Depth=32
Depth=0
127
012764
127
64
127
0
12764
127
0
Velocity with which you play a note Velocity with which you play a noteVelocity with which you play a note
Actual
resulting
velocity
(affecting
the tone
generator)
Actual
resulting
velocity
(affecting
the tone
generator)
Actual
resulting
velocity
(affecting
the tone
generator)
When Depth (above) = 64
and Offset = 64
When Depth (above) = 64
and Offset = 96
When Depth (above) = 64
and Offset = 32