User Manual

Edit Search Utility Live SetPerformance
Normal Part (AWM2) Drum Part Normal Part (FM-X) Common/Audio
MODX Reference Manual
Normal Part (AWM2) Edit
Common
Part Settings
General
Pitch
Zone Settings
Zone Transmit
Effect
Routing
Ins A
Ins B
EQ
Ins Assign
Arpeggio
Common
Individual
Advanced
Motion Seq
Common
Lane
Mod / Control
Part LFO
Control Assign
Receive SW
Element
Osc / Tune
Pitch EG
Filter
Type
Filter EG
Scale
Amplitude
Level / Pan
Amp EG
Scale
Element LFO
Element EQ
All Element
Osc
Balance
Copy or Exchange
Elements
80
Reference
 When “2-band EQ” is selected
From this display you can make 2-band EQ settings.
EQ1 Type (2-band EQ1 Type)/EQ2 Type (2-band EQ2 Type)
Determines the Equalizer Type.
Settings: Thru, LPF, HPF, Low Shelf, Hi Shelf, Peak/Dip
Thru: This setting bypasses the equalizers leaving the entire signal unaffected.
LPF/HPF: This setting only passes signals below or above the Cutoff Frequency.
Low Shelf/Hi Shelf: This setting attenuates/boosts the signal at frequencies above or below the specified
Frequency setting
Peak/Dip: This setting attenuates/boosts the signal at the specified Frequency setting.
EQ 1 Gain (2-band EQ1 Gain)/EQ 2 Gain (2-band EQ2 Gain)
Determines the level gain of the frequency set in “EQ1 Freq” or “EQ2 Freq.”
This is not active when “EQ Type” is set to “Thru,” “LPF,” or “HPF.”
Settings: -12dB – +12dB
EQ 1 Freq (2-band EQ1 Frequency)/EQ 2 Freq (2-band EQ2 Frequency)
Determines the frequency to be attenuated/boosted.
This is not active when “EQ Type” is set to “Thru.”
Settings: 63Hz–18.0Hz
–
+
0
–
+
0
Low Shelf High Shelf
Gain
Frequency
Gain
Frequency
Frequency
–
+
0
Gain
Frequency
Frequency
Frequency