User Manual
Table Of Contents
- Contents
- Using the MODX+ Manuals
- Basic Structure
- Reference
- Display (touch panel) configuration
- Performance Play (Home)
- Motion Control
- Mixing
- Scene
- Play/Rec
- Smart Morph
- DAW Remote function
- Normal Part (AWM2) Edit
- Drum Part Edit
- Normal Part (FM-X) Edit
- Common/Audio Edit (Common/Audio)
- Category Search
- Utility
- Live Set
- Connecting an iPhone or iPad
- Connecting External MIDI Instruments
Edit Search Utility Live SetPerformance
Normal Part (AWM2) Drum Part Normal Part (FM-X) Common/Audio
MODX+ Reference Manual
Normal Part (FM-X) Edit
Common
Part Settings
General
Algorithm
Zone Settings
Zone Transmit
Pitch / Filter
Pitch
PEG/Scale
Filter Type
Filter EG
Filter Scale
Effect
Routing
Ins A
Ins B
EQ
Ins Assign
Arpeggio
Common
Individual
Advanced
Motion Seq
Common
Lane
Mod / Control
Part LFO
2nd LFO
Control Assign
Receive SW
Operator
Form / Freq
Level
Copy or Exchange
Operators
184
Reference
Normal Part (FM-X) Edit
A Normal Part (FM-X) can consist of up to eight Operators. There are two types of Normal Part (FM-X) Edit
displays: Operator Common Edit display, for editing settings common to all eight Operators; and Operator
Edit display, for editing individual Operators.
Operator Common Edit (Common)
From the General display you can set various parameters such as Part Name, Volume, and Pan.
Most parameters are the same as parameters on the Element Common Edit display for Normal Parts
(AWM2) (page 104) except the following additional parameters as bellows.
Random Pan
Determines the amount by which the sound of the selected Operator is panned randomly left and right for
each note you press. The Pan setting is used as the Center Pan position.
Settings: 0–127
Alternate Pan
Determines the amount by which the sound of the selected Operator is panned alternately left and right for
each note you press. The Pan setting is used as the basic Pan position.
Settings: L64–C–R63
Scaling Pan
Determines the degree to which the notes (specifically, their position or octave range) affect the Pan
position, left and right, of the selected Operator. At note C3, the main Pan setting is used for the basic Pan
position. Positive settings will cause the Pan position to be set left when you play in the lower range on the
keyboard and to be set right when you play in the higher range on the keyboard. A negative setting will
have the opposite effect.
Settings: -64 – +0 – +63
Part Settings
General
Operation
[PERFORMANCE (HOME)] [EDIT] Part selection Operator [Common] [Part Settings]
[General]