User Manual

Edit Search Utility Live SetPerformance
Normal Part (AWM2) Drum Part Normal Part (FM-X) Common/Audio
MODX+ Reference Manual
Normal Part (FM-X) Edit
Common
Part Settings
General
Algorithm
Zone Settings
Zone Transmit
Pitch / Filter
Pitch
PEG/Scale
Filter Type
Filter EG
Filter Scale
Effect
Routing
Ins A
Ins B
EQ
Ins Assign
Arpeggio
Common
Individual
Advanced
Motion Seq
Common
Lane
Mod / Control
Part LFO
2nd LFO
Control Assign
Receive SW
Operator
Form / Freq
Level
Copy or Exchange
Operators
187
Reference
Same as the Element Common Edit parameters for Normal Parts (AWM2) (page 106), except that the
Legato Slope parameter is not available.
From the Pitch EG/Scale display you can make all time and level settings for the Pitch EG, which determine
how the pitch of the sound changes over time, and the Scale for Parts.
The full names of the available parameters are shown in the chart below, as they appear in the display.
Settings: Time: 0–99
Level: -50 – +50
PEG Depth
Determines the pitch range for Pitch EG.
Settings: 8 oct, 2 oct, 1 oct, 0.5 oct
Depth/Vel (PEG Depth Velocity Sensitivity)
Determines how the pitch range will be generated according to the Velocity (strength) with which you play
notes on the keyboard.
Settings: 0–7
Time/Key (PEG Time Key Follow Sensitivity)
Determines the degree to which the notes (specifically, their position or octave range) affect the Pitch EG
Times. The Center Key (C3) is used as the basic pitch for this parameter.
Settings: 0–7
Positive values: High notes result in a high PEG transition speed while low notes result in a slow speed.
0: The PEG transition speed does not change, regardless of the played note.
Pitch/Filter
Pitch
PEG/Scale (Pitch EG/Scale)
Operation
[PERFORMANCE (HOME)]  [EDIT]  Part selection  Operator [Common]  [Pitch/Filter] 
[PEG/Scale]
Initial Attack Decay1 Decay2 Release
Time
– Attack Time Decay1 Time Decay2 Time Release Time
Level
Hold Level Attack Level Decay1 Level Decay2 Level Release Level