Owners Manual

MODX+ Owner’s Manual
32
Playing the Keyboard
4-8 Adjust other parameters if necessary.
Here, set the Curve Polarity (Polarity) to “Bi,” and the
Curve Ratio (Ratio) to “+63.”
5 Set the instrument parameters for Part 2.
5-1
Touch the [Edit Common Control Settings] button.
The Control Assign display for Common/Audio Edit
appears.
5-2 Touch the [+] button.
Destination 7 is added.
5-3 On the [Destination 7] tab, set Source to “Asgn
Knob 7,” and [Destination 7] to “Part 2 Assign 7.”
5-4 Touch the [Edit Part 2 Control Settings] button.
Set the parameters the same as the ones for Part 1.
Here, set the Curve Polarity (Polarity) to “Bi,” and the
Curve Ratio (Ratio) to “-64.”
This completes the setting.
 When further adjustments are needed
• Touch the [Edit Common Control Settings] button, and
switch between Destination 6 and 7, and adjust the
Curve Type or Ratio.
or
• Press KNOB POSITION [1], turn Knobs 6 and 7 to
make a setting for when the Super Knob is turned all
the way to the left, and simultaneously press [SHIFT]
and KNOB POSITION [1] to store the settings. Next,
press the KNOB POSITION [2], turn the knobs again to
make a setting for when the Super Knob is turned all
the way to the right, and simultaneously press [SHIFT]
and KNOB POSITION [2] to store the setting.
Checking the Super Knob settings
This section covers the procedure to check the parameter
values changed by operation of the Super Knob.
1 Press the [PERFORMANCE (HOME)] button.
The button lights, indicating that you can make common
settings for all Parts.
2 With the [View] button off, press the [ASSIGN]
button to select Common Assign 1–4 or
Common Assign 5–8.
The button lights when Assign 1–4 is selected, and the
button flashes when Assign 5–8 is selected.
The functions currently assigned to Knobs 1–4 (5–8) and
the parameter values are shown.
3 Turn the Super Knob while playing the
keyboard.
All relevant parameter values are simultaneously
changed and all assigned functions are applied to the
sound.
NOTE
For details about Knob assignments and Super Knob settings,
see the Reference Manual PDF document.
Checking parameters assigned to the
Super Knob
To confirm the parameters assigned to Super Knob, open
the Super Knob display.
1 While the Performance Play display is shown,
touch the [Motion Control] tab on the left side
of the display.
2 Touch the [Super Knob] tab on the left side of
the display.
The Super Knob display appears.
3 On the Super Knob display, touch the [Edit
Super Knob].
The Control Assign display appears.
You can see detailed information for the Super Knob
settings within one page. Make adjustments if necessary.
NOTE
The Control Assign display can be opened from the Performance
Edit display, by first touching the [Control] tab on the left side of the
display, and then touching the [Control Assign] tab.
4-85-1