User Manual
Edit Search Utility Live SetPerformance
Normal Part (AWM2) Drum Part Normal Part (FM-X) Common/Audio
MONTAGE 참고 설명서
Normal Part (FM-X) Edit
Common
Part Settings
General
Algorithm
Zone Settings
Zone Transmit
Pitch / Filter
Pitch
PEG/Scale
Filter Type
Filter EG
Filter Scale
Effect
Routing
Ins A
Ins B
EQ
Arpeggio
Common
Individual
Advanced
Motion Seq
Common
Lane
Mod / Control
Part LFO
2nd LFO
Control Assign
Receive SW
Operator
Form / Freq
Level
139
본편
Pitch Modulation(2차 LFO 피치 모듈레이션 깊이)
2차 LFO 파형이 사운드의 피치를 변경(변조)하는 정도(깊이)를 결정합니다.
설정: 0 – 99
Amplitude Modulation(2차 LFO 진폭 모듈레이션 깊이)
2차 LFO 파형이 사운드의 진폭을 변경(변조)하는 정도(깊이)를 결정합니다.
설정: 0 – 99
Filter Modulation(2차 LFO 필터 모듈레이션 깊이)
2차 LFO 파형이 필터 차단 주파수를 변경(변조)하는 정도(깊이)를 결정합니다.
설정: 0 – 99
Pitch Modulation Operator Depth Ratio
(2차 LFO 피치 모듈레이션 오퍼레이터 깊이 비율)
“2nd LFO Pitch Modulation Depth”에서 결정되는 각 오퍼레이터의 양(깊이)을 조절합니다.
설정: 0 – 7
Amplitude Modulation Operator Depth Ratio
(2차 LFO 진폭 모듈레이션 오퍼레이터 깊이 비율)
“2nd LFO Amplitude Modulation Depth”에서 결정되는 각 오퍼레이터의 양(깊이)을 조절합니다.
설정: 0 – 7
Destination 파라미터의 다른 설정값을 제외하고 일반 파트(AWM2)의 Element Common Edit 파라미터(89페
이지)와 동일합니다. 설정값에 관한 자세한 내용은 Data List PDF 문서를 참조하십시오.
다음 파라미터도 이 화면에 표시됩니다.
Operator SW(오퍼레이터 스위치)
컨트롤러가 각 개별 오퍼레이터에 영향을 줄지(On/Off) 여부를 선택합니다. 오퍼레이터 관련 파라미터가
“Destination”에서 설정된 경우에만 사용할 수 있습니다.
설정: Off, On
Control Assign
작업
[PERFORMANCE] [EDIT] 파트 선택 ELEMENT/OPERATOR [COMMON]
[Mod/Control] [Control Assign]