User Manual

Part Parameters
11
Pitch Key Follow
Sensitivity Center Key
Determines the central note or pitch for Pitch Key Follow Sensitivity.
The note number set here is the same pitch as normal regardless of the
Pitch Key Follow Sensitivity setting.
Figure 3: Pitch Key Follow Sensitivity and Center Key
A: Lower range
B: Center Key
C: Higher range
D: Amount of pitch change
E: When Pitch Key Follow Sensitivity = +100%
F: Large
G: Small
This parameter for the Normal Part (FM-X) is fixed to C3. You can not
change the value. This parameter is available only when “Oscillator Freq
Mode” is set to “Fixed.”
Detune (for Normal Parts
(FM-X))
Sets the Output Pitch of the Operator slightly higher or lower.
Even if the same parameter value is set for both “Coarse Tune” and “Fine
Tune,” the Detune lets you slightly raise or lower the pitch of each
Operator, allowing you to add an extra dimension to the sound and
enhance the spatial characteristics.
+
–
D
E
F
G
B
C
A