User Manual

Part Parameters
21
BEF (Band-Eliminate
Filter)
The Band-Eliminate Filter has an opposite effect on the sound compared
to the Band-Pass Filter.
When this Filter Type is selected, you can set the Cutoff Frequency around
which the audio signal is muted or eliminated.
Figure 20: Band-Eliminate Filter
A: Center Frequency
B: Cutoff Range
C: Frequencies that are “passed” by the filter
X: Frequency
Y: Level
BEF12 -12 dB/oct Band-Eliminate Filter.
BEF6 -6 dB/oct Band-Eliminate Filter.
Dual LPF Two -12 dB/oct Low-Pass Filters connected in parallel.
You can edit the distance between the two Cutoff Frequencies. The result
of the filter is displayed on the screen.
Figure 21: Dual Low-Pass Filters
A: Distance
B: Lower Cutoff Frequency (Once you set the Lower Cutoff Frequency,
the Higher Cutoff Frequency will be automatically set.)
X: Frequency
Y: Level
Dual HPF Two -12 dB/oct High-Pass Filters connected in parallel.
Dual BPF Two -6 dB/oct Band-Pass Filters connected in parallel.
Y
B
C
X
A
Y
B
X
A