User Manual

Part Parameters
22
Dual BEF Two -6 dB/oct Band-Eliminate Filters connected in serial.
Figure 22: Dual Band-Eliminate Filters
A: Distance
B: Lower Cutoff Frequency (Once you set the Lower Cutoff Frequency,
the Higher Cutoff Frequency will be automatically set.)
X: Frequency
Y: Level
LPF12+HPF12 A combination of a -12 dB/oct Low-Pass Filter and a -12 dB/oct High-Pass
Filter connected in serial.
When this Filter Type is selected, HPF Cutoff and HPF Key Follow
Sensitivity can be set.
LPF6+HPF6 A combination of a -6 dB/oct Low-Pass Filter and a -6 dB/oct High-Pass
Filter connected in serial.
When this Filter Type is selected, HPF Cutoff and HPF Key Follow
Sensitivity can be set.
LPF12+BPF6 A combination of a -12 dB/oct Low-Pass Filter and a -6 dB/oct Band-Pass
Filter connected in parallel.
You can edit the distance between the two Cutoff Frequencies. The result
of the filter is displayed on the screen.
Figure 23: LPF12+BPF6
A: Distance
B: Lower Cutoff Frequency (Once you set the Lower Cutoff Frequency,
the Higher Cutoff Frequency will be automatically set.)
X: Frequency
Y: Level
Y
B
X
A
Y
B
X
A