User Manual

Part Parameters
51
1-3-6 Motion Sequencer
The Motion Sequencer feature lets you dynamically change sounds by operating parameters
depending on sequences created in advance.
It provides real time control for changing sounds depending on various sequences such as
Tempo, Arpeggio, or the rhythm of external connected devices.
You can assign desired sequence types for one Lane.
Accent Start Quantize Determines the start timing of the Accent Phrase when the Velocity higher
than the specified threshold in Accent Velocity Threshold is received.
 Off: The Accent Phrase starts as soon as the Velocity is received.
 On: The Accent Phrase starts on the beat specified for each Arpeggio
type after the Velocity is received.
Fixed SD/BD (for Drum
Parts)
Determines whether or not C1 and D1 are fixed as notes for Bass Drum
(BD) and Snare Drum (SD) in Arpeggio playback.
When this parameter is set to On, C1 will be used as the note of the Bass
Drum and D1 will be used as the note of the Snare Drum in Arpeggio
playback.
Although most Drum Kits assign the Bass Drum sound to C1 and the Snare
Drum to D1, certain Drum Kits additionally assign these sounds to other
notes and certain Arpeggio Types are created by using those different
notes. Accordingly, you may hear improper sounds depending on the
selected Arpeggio Type and Drum Kit. Setting this parameter to On may
solve such problems.
Motion Seq Master
Switch
Determines whether the Motion Sequencer for the entire Performance is
active or not.
Motion Seq Part Switch Determines whether the Motion Sequencer for the selected Part is active
or not.
Lane Switch Determines whether each Lane is active or not.
Amplitude Determines the Amplitude change of the entire sequence. There are three
parameters available for different ranges (below).
 Common Motion Seq Amplitude: Offsets the Amplitude of the Lane
in the Performance when “MS FX” for the Lane is set on On.
 Part Motion Seq Amplitude: Offsets the Amplitude of the Lane in the
Part when “MS FX” for the Lane is set on On.
 Motion Seq Amplitude: Determines the Amplitude of each
Sequence.
Pulse Shape Determines the Pulse shape of the Sequence. There are two parameters
available for different ranges (below).
 Common Motion Seq Pulse Shape: Offsets the Pulse Shape of the
Lane parameter in the Performance when “MS FX” for the Lane is set
to on and “Control” for the parameter is set on On.
 Part Motion Seq Pulse Shape: Offsets the Pulse Shape of the Lane
parameter in the Part when “Control” for the parameter is set on On.