User Manual

Part Parameters
52
Smoothness Determines the smoothness of the time change of the Sequence. There
are three parameters available for different ranges (below).
 Common Motion Seq Smoothness: Offsets the Smoothness of the
Lane in the Performance when “MS FX” for the Lane is set on On.
 Part Motion Seq Smoothness: Offsets the Smoothness of the Lane
in the Part when “MS FX” for the Lane is set on On.
 Motion Seq Smoothness: Determines the Smoothness of each
Sequence.
Random Determines how randomly change the Step Value is. There are two
parameters available for different ranges (below).
 Common Motion Seq Random: Offsets the Random of the Lane in
the Performance when “MS FX” for the Lane is set on On.
 Motion Seq Random: Determines the Random setting of each Part.
Lane FX Receive Determines whether or not the Lane is affected by the knob operation of
ARP/MS FX.
 On: The Lane is affected by parameter values of ARP/MS FX (Swing,
Unit Multiply, Gate Time Rate, Velocity Rate, Amplitude, Pulse
Shape, Smooth, and Random) and the operation of the [MOTION
SEQ HOLD] button.
Lane Trigger Receive Determines whether the Lane responds to the MS Trigger or not.
 On: The Lane is affected by the operation of the [MOTION SEQ
TRIGGER] button.
Lane Sync Determines if the playback of the Motion Sequence is synchronized to the
tempo of the Performance, Beat, Part Arpeggio, or Lane 1 (only when any
Lane other than Lane 1 is selected.)
Lane Speed Determines the speed of the playback of the Motion Sequence.
This parameter is active when the Lane Sync is set to “Off.”
Lane Key On Reset Determines whether or not the playback of the Motion Sequence is
stopped when you play the keyboard.
 Off: The playback of the Motion Sequence continues even after you
play the keyboard.
 Each-on: Each time you play the keyboard, the playback of the
Motion Sequence is reset. Playback restarts from the first step.
 1st-on: When you play the first note on the keyboard, the playback of
the Motion Sequence is reset and the playback starts from the first
step. If you play a second note while the first is being held, the
playback position of the Motion Sequence is not reset.
Lane Loop Determines the Motion Sequence is played only once or repeatedly.
 On: While you hold down the keys, the Motion Sequence is played
repeatedly.
 Off: Even if you hold down the keys, the Motion Sequence is played
only once.