User Manual

Part Parameters
57
Insertion Connection
Type
Lets you set the effect routing for Insertion Effects A and B.
 Parallel (for Normal Parts (AWM2) and Drum Parts): Signals
processed with the Insertion Effect A and B blocks are sent to the
Master Effect, Master EQ, Reverb, Variation, and Envelope Follower
blocks.
Figure 55: Insertion Effect Connection Parallel
 Ins A>B: Signals processed with the Insertion Effect A are sent to the
Insertion Effect B and signals processed with the Insertion Effect B
are sent to the Master Effect, Master EQ, Reverb, Variation, and
Envelope Follower blocks.
Figure 56: Insertion Effect Connection Ins A>B
 Ins B>A: Signals processed with the Insertion Effect B are sent to the
Insertion Effect A and signals processed with the Insertion Effect A
are sent to the Master Effect, Master EQ, Reverb, Variation, and
Envelope Follower blocks.
Figure 57: Insertion Effect Connection Ins B>A
Reverb The Reverb System Effect block adds a warm ambience to the sound,
simulating the complex reflections of actual performance spaces, such as
a concert hall or a small club.
Reverb Send Adjusts the reverb send level.The higher the value the deeper the Reverb.
Variation The Variation System Effect block uses various type of modulation
processing in addition to Chorus, Reverb, and Delay.
Variation Send Adjusts the Variation Send level. The higher the value the deeper the
Variation Effect.
Variation to Reverb Determines the Send level of the signal sent from the Variation Effect to
the Reverb Effect.
The higher the value, the deeper the Reverb that is applied to the Variation
processed signal.
Reverb Return Determines the Return level of the Reverb Effect.
Variation Return Determines the Return level of the Variation Effect.
Reverb Pan Determines the pan position of the Reverb effect sound.
Variation Pan Determines the pan position of the Variation effect sound.
A
B
A
B
A
B