User Manual

Effects
64
2-2-9 Wah
This Effect cyclically modulates the tone brightness (Cutoff Frequency of a filter). Auto Wah
modulates the tone via LFO, Touch Wah modulates the tone via volume and Pedal Wah
modulates the tone by pedal control. These effects emulate the characteristics of analog wah
effects used in the 1970s, recreating a warm, high-quality wah-wah effect.
2-2-10 Lo-Fi
This Effect intentionally degrades the audio quality of the input signal via several methods such
as lowering the sampling frequency.
UNI COMP UP Compressor using “upward” algorithm for making quiet sounds louder.
Figure 60: Uni Comp Up
A: Threshold
B: Ratio
C: Gain Limit
X: Input
Y: Output
PARALLEL COMP Compressor applying parallel processing of the compressed sounds and
dry sounds.
A
B
C
X
Y
VCM AUTO WAH Modulates the tone via LFO.
VCM TOUCH WAH Modulates the tone via Amplitude.
VCM PEDAL WAH Modulates the tone via pedal control.
To use this properly, assign the Pedal Control parameter of this Effect
Type to the Foot Controller in the Controller Set display, then use the Foot
Controller to control this effect in real time.
LO-FI Degrades the audio quality of the input signal to get a lo-fi sound.
NOISY Adds noise to the current sound.
DIGITAL TURNTABLE Simulates the noise of an analog record.
BIT CRUSHER Produces distortion by reducing the resolution or bandwidth of the digital
sound.