User Manual

Effects
67
2-3 Effect Parameters
2-3-1 A
2-3-2 B
AEG Phase Offsets the phase of the Amplitude EG.
AM Depth Determines the depth of Amplitude Modulation.
AM Inverse R Determines the phase of the Amplitude Modulation for the R channel.
AM Speed Determines the Amplitude Modulation speed.
AM Wave Selects the wave for modulating the Amplitude.
AMP Type Selects the amplifier type to be simulated.
Analog Feel Adds the characteristics of an analog flanger to the sound.
Attack Determines the amount of time that elapses between the playing of a key
and the start of the compressor effect.
Attack Offset Determines the amount of time that elapses between the playing of a key
and the start of the wah effect.
Attack Time [Dynamic Flanger, Dynamic Phaser, Dynamic Ring Modulator, Dynamic
Filter] Determines the attack time of the envelope follower.
[Beat Repeat] Determines the attack time of the gate effect for the entire
sound.
Balance Determines the balance of the low frequencies and the high frequencies.
Bass Determines the sound quality at the low frequencies.
Bit Lowers the resolution (bit accuracy) of the sound.
Bit Assign Determines how Word Length is applied to the sound.
Bit Link Determines the offset Bit value for the Side against the Mid when M/S (Mid/
Side) is ON.
BPF1-10 Gain Determines each output gain of BPFs 1 - 10 of the Vocoder effect.
Break Sets Break point to On.
Brilliant Determines the volume of the sound for which low frequencies are cut.