User Manual

Effects
69
2-3-4 D
Damper Control When the half-damper compatible FC3 footswitch is connected to the
instrument, the Damper Control parameter is controlled by the FC3,
allowing for partial damper effects.
Decay Controls how the Reverb sound decays.
Delay Control Determines the depth/amount of the effect type selected by Delay SW.
Delay Input Level Determines the delay input level.
Delay Level Determines the level of the delayed sound.
Delay Level C Determines the level of the delayed sound for the center channel.
Delay Mix Determines the level of the delayed mixed sound when multiple effects are
applied.
Delay Offset Determines the offset value of the delay modulation.
Delay SW Determines the delay type or modulation type.
Delay Time Determines the delay of the sound in note value or absolute time.
Delay Time C, L, R Determines the delay time for each channel: center, left and right.
Delay Time L>R Determines the amount of time between the moment the sound is input
from the L channel and the moment the sound is output to the R channel.
Delay Time Offset R Determines the delay time for the R channel as offset.
Delay Time R>L Determines the amount of time between the moment the sound is input
from the R channel and the moment the sound is output to the L channel.
Delay Transition Rate Determines the speed (rate) at which the delay time is changed from the
current value to the specified new value.
Density Determines the density of the reverberations or reflections.
Depth Determines a specific value—usually the degree or intensity of the effect—
depending on the selected Effect type.
For Space Simulator, this parameter determines the depth of the simulated
room.
For VCM Flanger, this parameter determines the Amplitude of the LFO
wave that controls the cyclic change of the delay modulation.
For Phaser Type, this parameter determines the Amplitude of the LFO
wave that controls the cyclic change of the phase modulation.
For Jazz Combo, this parameter determines the depth of chorus/vibrato.
Detune Determines the amount by which pitch is detuned.
Device Selects the device for changing how to distort the sound.
Diffusion For Reverb type, this parameter determines the spread of the reverb.
For Tempo Phaser and
Early Re
flection, this parameter determines the
spread of the selected effect.
Direction For Flanger, Phaser, Wah and Filter effects, this parameter determines the
direction of the modulation controlled by the envelope follower.
For Tempo Spiralizer F and Tempo Spiralizer, this parameter determines
the direction of the pitch shift.
Distortion Determines the extent to which the sound is distorted.
Dist EQ Switches the EQ type for adjusting the quality of the distorted sound.
Dist Drive Controls the amount of the distortion.