User Manual

Effects
70
2-3-5 E
Dist Presence Determines each distortion type setting.
Dist SW Switches the distortion types.
Dist Tone Adjusts the distortion tone level.
Dist Type Determines the distortion type.
Divide Freq High Determines the high frequency for dividing the entire sound into three
bands.
Divide Freq Low Determines the low frequency for dividing the entire sound into three
bands.
Divide Min Level Determines the minimum level of the portions extracted via the Slice effect.
Divide Type Determines how the sound (wave) is sliced by the note length.
Drive Determines the extent of a series of specific effects.
For Distortion effects, Noisy, Slice, and Rotary Speaker 2, this parameter
determines the extent to which the sound is distorted.
For one of the Miscellaneous effects, this parameter determines the extent
to which the enhancer or talking modulator is applied.
Drive Horn Determines the depth of the modulation generated via the rotation of the
horn.
Drive Rotor Determines the depth of the modulation generated via the rotation of the
rotor.
Dry Level Determines the level of the dry (unprocessed) sound.
Dry LPF Cutoff
Frequency
Determines the Cutoff Frequency of the Low-Pass Filter applied to the dry
sound.
Dry Mix Level Determines the level of the dry sound.
Dry Send to Noise Determines the level of the dry signal sent to the noise effect.
Dry/Wet Determines the balance of the dry sound and the effect sound.
Dry/Wet Balance Determines the balance of the dry sound and the effect sound.
Dyna Level Offset Determines the offset value added to the output of the envelope follower.
Dyna Threshold Level Determines the minimum level at which the envelope follower starts.
Edge Sets the curve that determines how the sound is distorted.
Emphasis Determines the change of the characteristics at high frequencies.
EQ Frequency Determines the center frequency for each band of the EQ.
EQ Gain Determines the level gain of the EQ center frequency for each band.
EQ High Frequency Determines the center frequency of the high EQ band that is attenuated/
boosted.
EQ High Gain Determines the amount of boost or attenuation applied to the high EQ
band.
EQ Low Frequency Determines the center frequency of the low EQ band that is attenuated/
b
oosted.
EQ Low Gain Determines the amount of boost or attenuation applied to the low EQ band.