User Manual

Effects
71
2-3-6 F
EQ Mid Frequency Determines the center frequency of the middle EQ band that is attenuated/
boosted.
EQ Mid Gain Determines the amount of boost or attenuation applied to the middle EQ
band.
EQ Mid Width Determines the width of the middle EQ band.
EQ Width Determines the width of the EQ band.
EQ1(LSH) Frequency Determines the center frequency of the EQ1 (Low Shelving).
EQ1(LSH) Gain Determines the level gain of the EQ1 (Low Shelving) center frequency.
EQ2 Frequency Determines the center frequency of the EQ2.
EQ2 Gain Determines the level gain of the EQ2 center frequency.
EQ2 Q Determines the EQ2 bandwidth, or range of EQ2 frequencies.
EQ3 Frequency Determines the center frequency of the EQ3.
EQ3 Gain Determines the level gain of the EQ3 center frequency.
EQ3 Q Determines the EQ3 bandwidth, or range of EQ3 frequencies.
EQ4 Frequency Determines the center frequency of the EQ4.
EQ4 Gain Determines the level gain of the EQ4 center frequency.
EQ4 Q Determines the EQ4 bandwidth, or range of EQ4 frequencies.
EQ5(HSH) Frequency Determines the center frequency of the EQ5 (High Shelving).
EQ5(HSH) Gain Determines the level gain of the EQ5 (High Shelving) center frequency.
ER/Rev Balance Determines the level balance of the early reflection and Reverb sounds.
F/R Depth Determines the depth of the F/R (front/rear) pan.
This parameter of Auto Pan is available when Pan Direction is set to Lturn
or Rturn.
FB Hi Damp Offset R Determines the amount of decay in high frequencies for the R channel as
offset.
FB Level Offset R Determines the feedback level for the R channel as offset.
Feedback Determines the level of the sound signal output from the effect block and
returned to its own input.
Feedback (Level) Determines a specific value, depending on the selected Effect type.
For the Reverb and Early Reflection effects, this parameter determines the
feedback level of the initial delay.
For the delay, chorus, flanger, comp distortion delay, and Tech effects, this
parameter determines the feedback level output from the delay and
returned to the input.
For Analog Delay (Short) and Analog Delay (Long), this parameter
determines the feedback level of the delayed sound.
For Tempo Phaser and Dynamic Phaser, this parameter determines the
feedback level output from the phaser and returned to the input.
Fee
dback
High Damp Determines the amount of decay of the high frequencies in the feedback
sound.