User Manual

Effects
72
2-3-7 G
2-3-8 H
Feedback Level 1, 2 Determines the feedback level of the delayed sound in each of the first
series and second series.
Feedback Time Determines the delay time of the feedback.
Feedback Time L, R Determines the time of the feedback delay L and R.
Filter Output Level Determines the output level of the Filter.
Filter Type Determines a specific value, depending on the selected setting.
For Lo-Fi, this parameter selects the tonal characteristic type.
For Dynamic Filter and Control Filter, this parameter determines the Filter
Type.
For Beat Repeat, this parameter determines the filter type for the effected
sound.
Fine 1, 2 Fine-tunes the pitch for each of the first series and second series.
Flanger Control Determines the delay value (the value of the Comb Filter) of the delay
modulation.
Formant Offset This Vocoder parameter adds the offset value to the Cutoff Frequency of
BPF for the Inst input.
Formant Shift This Vocoder parameter shifts the Cutoff Frequency of the BPF for Inst
input.
Freeze When this parameter is set to On, the effect repeats until the parameter is
set to Off.
Gain Determines the level gain of the pre-amplifier.
Gain Boost Switches the level gain of the power amplifier.
Gain Limit Determines the maximum gain level.
Gate Time For Slice, this parameter determines the gate time of the sliced portion.
For Beat Repeat, this parameter determines the gate time of the entire
sound.
Height Determines the height of the simulated room.
High Attack Determines the amount of time from the moment a key is pressed to the
moment the compressor is applied to the high frequencies.
High Cut Cuts the level of the high frequencies.
High Damp Frequency Determines the characteristic of the high frequencies.
High Gain Determines the output gain for the high frequencies.
High Level Determines the level of the high frequencies.
High Mute Switches the mute status of the high frequencies.
High Ratio Determines a specific value, depending on the selected Effect type.
For REV-X Hall, REV-X Room, HD Hall, HD Room, and HD Plate, this
parameter determines the ratio of the high frequencies.
For Multi-band Comp, this parameter determines the ratio of the
compressor for the high frequencies.