User Manual

Effects
73
2-3-9 I
2-3-10 K
High Subband Gain Lch,
Rch
Determines the gain level of the high frequencies for the stereo sound (R
and L channels).
High Threshold Determines the minimum input level at which the effect is applied to the
high frequencies.
High Treble Determines the gain of the high frequencies which is higher than the treble
setting.
Horn Fast Determines the frequency of the horn (higher range) when the Speed
Control is set to Fast.
Horn Fast/Slow Determines how long it takes for the rotation speed of the horn (higher
range) to change from Fast to Slow when the rotation speed is switched.
Horn Slow Determines the frequency of the horn (higher range) when the Speed
Control is set to Slow.
Horn Slow/Fast Determines how long it takes for the rotation speed of the horn (higher
range) to change from Slow to Fast when the rotation speed is switched.
Horn Speed Fast Determines the speed of the horn when the slow/fast switch is set to Fast.
Horn Speed Slow Determines the speed of the horn when the slow/fast switch is set to Slow.
HPF Cutoff Frequency Determines a specific value, depending on the selected Effect type.
For Reverb type, tech type, or misc type, this parameter determines the
Cutoff Frequency of the High-Pass Filter.
For Vocoder, this parameter determines the Cutoff Frequency for the High-
Pass Filter applied to the microphone sound.
HPF Output Level Determines how much the output from High-Pass Filter is mixed with the
output from the Vocoder.
Initial Delay Determines the amount of time that elapses between the direct, original
sound and the initial reflections.
Initial Delay 1, 2 Determines the delay time until the initial reflection for each of the first
series and second series.
Initial Delay Lch, Rch Determines the amount of time that elapses between the direct, original
sound and the initial reflections (echoes) that follow it for each of R and L
channels.
Input Level Determines the input level of the signal.
Input Mode Selects mono or stereo configuration for the input sound.
Input Select Selects an input channel.
Inst Level Determines the level of the keyboard performance sound which is to be
input to the Vocoder.
Knee Determines how the transition range changes around the threshold. The
higher the value, the shallower th
e transiti
on curve.