User Manual

Effects
74
2-3-11 L
L/R Depth Determines the depth of the L/R pan effect.
L/R Diffusion Determines the spread of the sound.
Lag Determines the lag time that is additionally applied to the delayed sound
specified via a note length.
Length Determines the amount of time for repeating.
Length Change Quantize Quantizes the timing for changing the length parameter.
LFO Depth Determines a specific value, depending on the selected Effect type.
For SPX Chorus, Symphonic, Classic Flanger, and Ring Modulator, this
parameter determines the depth of the modulation.
For Tempo Phase, this parameter determines the frequency of the phase
modulation.
LFO Phase Difference Determines the L/R phase difference of the modulated wave.
LFO Phase Reset Determines how the initial phase of the LFO is reset.
LFO Speed Determines a specific value, depending on the selected Effect type.
For Chorus effects, Flanger effects, Tremolo and Ring Modulator, this
parameter determines the frequency of the modulation.
For Tempo Phaser and Tempo Flanger, this parameter determines the
modulation speed via a note type.
For Auto Pan, this parameter determines the frequency of the Auto Pan.
LFO Wave Determines a specific value, depending on the selected Effect type.
For Flanger effects and Ring Modulator, this parameter selects the wave
for modulation.
For Auto Pan, this parameter determines the panning curve.
For VCM Auto Wah, this parameter selects the wave: sine or square.
Liveness Determines the decay characteristic of Early Reflection.
Low Attack Determines the amount of time from the moment a key is pressed to the
moment the compressor is applied to the low frequencies.
Low Cut Cuts the level of the low frequencies.
Low Gain Determines the output gain for the low frequencies.
Low Level Determines the output level for the low frequencies.
Low Mute Switches the mute status of the low frequencies.
Low Ratio Determines the ratio of low frequencies.
When “REV-X Hall” or “REV-X Room” is selected, this parameter
determines the ratio of the low frequencies.
When “Multi-band Comp” is selected, this parameter determines the ratio
of the compressor for the low frequencies.
Low Subband Gain Lch,
Rch
Determines the gain level of the low frequencies for the stereo sound (R
and L channels).
Low Threshold Determines the minimum input level at which the effect is applied to the low
frequencies.