User Manual

Effects
76
2-3-13 N
Mid3 Subband Gain Lch,
Rch
Determines the gain level of the Mid3 frequencies for the stereo sound (R
and L channels).
Mod Depth Determines the depth of the modulation.
Mod Depth Offset R Determines the depth of the modulation for R channel as offset.
Mod Feedback Determines the feedback level to the modulation.
Mod Gain Determines the gain of the modulation.
Mod LPF Cutoff
Frequency
Determines the Cutoff Frequency of the Low-Pass Filter applied to the
modulated sound.
Mod LPF Resonance Determines the Resonance of the Low-Pass Filter for the modulated
sound.
Mod Mix Balance Determines the mix balance of the modulated element.
Mod Speed Determines the modulation speed.
Mod Wave Type Selects the wave type for modulation.
Mode For VCM Phaser Mono and VCM Phaser Stereo, this parameter
determines the phaser type, or more specifically, the factor for forming the
phaser effect.
For British Combo, this parameter switches the pre-amplifier.
Modulation Phase Determines the L/R phase difference of the modulated wave.
Modulator Input Level Determines the input level of the modulator.
Move Speed Determines how long it takes to move the sound from the current status to
the sound specified via the Vowel parameter.
M/S When this parameter is set to On, each sound (center, left and right) is
modulated, respectively.
Noise Gate Attack Determines the amount of time that elapses between the playing of a key
and the start of the Noise Gate effect.
Noise Gate Release Determines the amount of time that elapses between the releasing of a
note and the end of the Noise Gate effect.
Noise Gate Threshold Determines the minimum input level at which the Noise Gate effect is
applied.
Noise Level Determines the noise level.
Noise LPF Cutoff
Frequency
Determines the Cutoff Frequency of the Low-Pass Filter applied to the
noise.
Noise LPF Q Determines the Resonance of the Low-Pass Filter applied to the noise.
Noise Mod Depth Determines the depth of the noise modulation.
Noise Mod Speed Determines the speed of the noise modulation.
Noise Tone Determines the tonal characteristics of the noise.
Normal Determines the volume of the standard sound.