User Manual

Effects
78
2-3-16 R
Pre Mod HPF Cutoff
Frequency
Determines the Cutoff Frequency of the High-Pass Filter before
modulation is applied.
Pre-LPF Cutoff
Frequency
Determines the Cutoff Frequency of the Low-Pass Filter before modulation
is applied.
Pre-LPF Resonance Determines the Resonance of the Low-Pass Filter for the input sound.
Presence For Amp Simulator effects this parameter controls high frequencies.
For Presence, this parameter determines the extent to which the effect is
applied.
R/H Balance Determines the volume balance of the horn (higher range) and rotor (lower
range).
Random Creates random repetition.
Ratio Determines the ratio of the compressor.
Release Determines the amount of time that elapses between the releasing of a key
and the end of the compressor effect.
Release Curve Determines the release curve of the envelope follower.
Release Time For Dynamic Flanger, Dynamic Phaser, Dynamic Ring Modulator, and
Dynamic Filter, this parameter determines the release time of the envelope
follower.
For Beat Repeat, this parameter determines the release time of the gate
for the entire sound.
Repeat Determines whether Repeat is active or not.
Resonance For Dynamic Filter and Control Filter, this parameter determines the
Resonance of the filter.
For Beat Repeat, the parameter determines the Resonance of the filter for
the effected sound.
Resonance Offset Determines the Resonance as offset.
Retrigger Attack Time Determines the attack time of the gate for the entire sound.
Retrigger Cycle Determines the cycle for repeating.
Retrigger Gate Time Determines the gate time for the entire sound.
Retrigger Release Time Determines the release time of the gate for the entire sound.
Retrigger Quantize When this parameter is set to On, the sequencer is repeated at the top of
the measure.
Reverb Delay Determines the delay time from the early reflections until the
reverberations.
Reverb Time Determines the Reverb time.
Reverse Repeats reverse playback.
Room Size Determines the size of the room in which the instrument sounds.
Rotor Fast Determines the frequency of the rotor (lower range) when the Speed
Control is set to Fast.
Rotor Slow D
etermines th
e frequency of the rotor (lower range) when the Speed
Control is set to Slow.