User Manual

Effects
79
2-3-17 S
Rotor Speed Fast Determines the speed of the rotor when the slow/fast switch is set to Fast.
Rotor Speed Slow Determines the speed of the rotor when the slow/fast switch is set to Slow.
Rotor/Horn Balance Determines the volume balance of the horn and rotor.
Rtr Fast/Slow Determines how long it takes for the rotation speed of the rotor (lower
range) to change from Fast to Slow when the rotation speed is switched.
Rtr Slow/Fast Determines how long it takes for the rotation speed of the rotor (lower
range) to change from Slow to Fast when the rotation speed is switched.
Sample Rate Lowers the Sample Rate.
Sample Rate Link Determines the offset value of the Sample Rate for the Side against the
Mid when M/S (Mid/Side) is ON.
Sampling Frequency
Control
Controls the sampling frequency.
Scale Type Determines how the pitch changes when “Step Mode” is set to “Scale.”
SC EQ Freq Determines the center frequency of the Side Chain EQ.
SC EQ Gain Determines the level gain of the Side Chain EQ.
SC EQ Q Determines the Side Chain EQ bandwidth.
Semitones Determines the pitch shift range when “Step Mode” is set to “Semitone.”
Sensitivity Determines a specific value, depending on the selected Effect type.
For Dynamic Flanger, Dynamic Phaser, and the Tech effects, this
parameter determines the sensitivity of the modulation applied to the input
change.
For VCM Touch Wah effects, this parameter determines the sensitivity of
the wah filter's change applied to the input change.
For British Combo effect, this parameter switches the gain level of the pre-
amplifier.
Side Bit Lowers the resolution (bit accuracy) for the Side chain.
Side Chain EQ When this is turned on, the EQ is applied for the corresponding input level
range of the Side Chain.
Side Chain Lvl Determines the Side chain input level.
Side Chain Input Level Determines the Side chain input level.
Side Sample Rate Lowers the Sample rate for the Side chain.
Slow-Fast Time of Horn Determines how long it takes for the rotation speed of the horn to change
from the current speed (slow or fast) to the other one (fast or slow) when
the rotation speed is switched.
Slow-Fast Time of Rotor Determines how long it takes for the rotation speed of the rotor to change
from the current speed (slow or fast) to another one (fast or slow) when the
rotation speed is switched.
Space Type Selects the type of space simulation.
Speaker Air Determines the characteristic of the speaker cabinet.