User Manual

Effects
80
2-3-18 T
Speaker Type For Amp Simulator 1 and Comp Distortion Delay, this parameter selects
the type of speaker simulation.
For US Combo, Jazz Combo, US High Gain, British Lead, Small Stereo,
British Combo, British Legend, and Multi FX, this parameter selects the
speaker type.
Speed Determines a specific value, depending on the selected Effect type.
For VCM Flanger, this parameter determines the frequency of the LFO
wave which controls the cyclic change of the delay modulation.
For Phaser, this parameter determines the frequency of the LFO wave
which controls the cyclic change of the phase modulation.
For VCM Auto Wah, this parameter determines the speed of the LFO.
For Vinyl Break, this parameter determines the amount of time between
the moment the sound starts and the moment the sound is stopped.
Speed Adjust For fine adjustment of the speed.
Speed Control Switches the rotary speed.
Spiral Turn the LFO On/Off.
Spiral Sync Determines the basic time period over which the pitch shifts step by step.
Spread Determines the spread of the sound.
Stage Determines the step number of the phase shifter.
Step Mode Determines whether the pitch shifts smoothly or step by step.
Step Transition Determines how long it takes for the pitch to change to the next pitch when
the pitch shifts step by step.
Texture Determines the texture of the sound effect.
Treble Determines the gain of the high frequencies.
Threshold Determines the minimum input level at which the effect is applied.
Time Sweep Determines the gradual change of the time length in each repetition.
Tone Shift Switches the characteristic of the Tone control.
Type Determines a specific value, depending on the selected Effect type.
For VCM Flanger, this parameter determines the flanger type.
For Wah effects, this parameter determines the type of the Auto Wah.
For Early Reflection, Gated Reverb, and Reverse Reverb, this parameter
determines the type of the reflection sound.
For US High Gain and British Lead, this parameter switches the type of the
amplifier.
For Analog Delay (Short) and Analog Delay (Long), this parameter
determines the characteristic of the delay effect.
For Parallel Comp, this parameter determines the compressor type.