User Manual

MONTAGE Data List
156
Effect Parameter List
[14] BEAT REPEAT EVEN
[15] BEAT REPEAT TRIPLET
[16] BEAT REPEAT EVEN+TRIPLET
[17] BEAT REPEAT FREE
Category — MISC
[1] VCM EQ 501
[2] PRESENCE
[3] HARMONIC ENHANCER
[4] STEREOPHONIC OPTIMIZER
[5] TALKING MODULATOR
[6] DAMPER RESONANCE
No. Parameter Range Value Tbl No.
1 Repeat Off, On (0 – 1)
2 Length Even, Triplet, Even+Triplet:
1/256 – 1/1
Free: 1/256.00 – 1/1.00
Even: (0 – 8)
Triplet: (0 – 8)
Even+Triplet: (0 – 16)
Free: (0 – 127)
48
3 Freeze Off, On (0 – 1)
4 Gate Time 0 – 100% (0 – 100)
5 Attack Time 0 – 100% (0 – 100)
6 Release Time 0 – 100% (0 – 100)
7 Play Speed -1.0 – +1.0 (1 – 127)
8 Pitch Sweep -63 – +63 (1 – 127)
9 Time Sweep -63 – +63 (1 – 127)
10 Dry/Wet Balance D63>W – D=W – D<W63 (1 – 127)
11 Filter Type Thru, LPF, HPF (0 – 2)
12 Cutoff 14.1Hz – 21.1kHz (0 – 127) 46
13 Resonance 0.0 – 12.7 (0 – 127)
14 Output Level -19.5dB – +12dB (1 – 127) 47
15 Random Off, On (0 – 1)
16 Retrigger Cycle 1Beat, 1/2Beat, 1/4Beat (0 – 2)
17 Retrigger Gate Time 0 – 100% (0 – 100)
18 Retrigger Attack Time 0 – 100% (0 – 100)
19 Retrigger Release Time 0 – 100% (0 – 100)
20 Retrigger Quantize Off, On (0 – 1)
21 Length Change Quantize 1Beat, 1/2Beat, 1/4Beat,
1/8Beat, Off
(0 – 4)
No. Parameter Range Value Tbl No.
1 EQ1 (LSH) Frequency 31.5Hz – 2.0kHz (12 – 84) 28
2 EQ1 (LSH) Gain -12.0dB – +12.0dB (60 – 300)
3 EQ2 Q 0.50 – 16.00 (0 – 60) 29
4 EQ2 Frequency 50.0 Hz – 20.0kHz (20 – 124) 28
5 EQ2 Gain -18.0dB – +18.0dB (0 – 360)
6 EQ3 Q 0.50 – 16.00 (0 – 60) 29
7 EQ3 Frequency 50.0Hz – 20.0kHz (20 – 124) 28
8 EQ3 Gain -18.0dB – +18.0dB (0 – 360)
9 EQ4 Q 0.50 – 16.00 (0 – 60) 29
10 EQ4 Frequency 50.0Hz – 20.0kHz (20 – 124) 28
11 EQ4 Gain -18.0dB – +18.0dB (0 – 360)
12 EQ5 (HSH) Frequency 500Hz – 20.0kHz (60 – 124) 28
13 EQ5 (HSH) Gain -12.0dB – +12.0dB (60 – 300)
14 Output Level -12.0dB – +12.0dB (60 – 300)
15 —
16 —
No. Parameter Range Value Tbl No.
1 Presence 0 – 100 (0 – 100)
2 Texture 0 – 100 (0 – 100)
3 Output Level -6dB – +6dB (0 – 120)
4—
5—
6—
7—
8—
9—
10 —
11 —
12 —
13 —
14 —
15 —
16 —
No. Parameter Range Value Tbl No.
1 HPF Cutoff Frequency 500Hz – 16.0kHz (28 – 58) 3
2 Drive 0 – 127 (0 – 127)
3 Mix Level 0 – 127 (0 – 127)
4—
5—
6—
7—
8—
9—
10 —
11 —
12 —
13 —
14 —
15 —
16 —
No. Parameter Range Value Tbl No.
1 Low Subband Gain Lch -14.00dB – 6.00dB (5801 – 7801)
2 Low Subband Gain Rch -14.00dB – 6.00dB (5801 – 7801)
3 Mid1 Subband Gain Lch -14.00dB – 6.00dB (5801 – 7801)
4 Mid1 Subband Gain Rch -14.00dB – 6.00dB (5801 – 7801)
5 Mid2 Subband Gain Lch -14.00dB – 6.00dB (5801 – 7801)
6 Mid2 Subband Gain Rch -14.00dB – 6.00dB (5801 – 7801)
7 Mid3 Subband Gain Lch -14.00dB – 6.00dB (5801 – 7801)
8 Mid3 Subband Gain Rch -14.00dB – 6.00dB (5801 – 7801)
9 High Subband Gain Lch -14.00dB – 6.00dB (5801 – 7801)
10 High Subband Gain Rch -14.00dB – 6.00dB (5801 – 7801)
11 Width Low 0.00 – 1.00 (0 – 100)
12 Width Mid1 0.00 – 1.00 (0 – 100)
13 Width Mid2 0.00 – 1.00 (0 – 100)
14 Width Mid3 0.00 – 1.00 (0 – 100)
15 Width High 0.00 – 1.00 (0 – 100)
16 On/Off Switch Off, On (0 – 1)
No. Parameter Range Value Tbl No.
1 Vowel a, i, u, e, o (0 – 4)
2 Move Speed 1 – 62 (1 – 62)
3 Drive 0 – 127 (0 – 127)
4 Output Level 0 – 127 (0 – 127)
5—
6—
7—
8—
9—
10 —
11 —
12 —
13 —
14 —
15 —
16 —
No. Parameter Range Value Tbl No.
1—
2—
3—
4—
5—
6—
7—
8—
9—
10 Dry/Wet Balance D63>W – D=W – D<W63 (1 – 127)
11 —
12 —
13 —
14 —
15 —
16 Damper Control 0 – 127 (0 – 127)