User Manual

MONTAGE Data List
189
MIDI Data Table
“Top Address” indicates the top address of each block designated by bulk dump operation.
“Byte Count” indicates the data size contained in each block designated by bulk dump
operation.
The Block from the Bulk Header to the Bulk Footer of the Performance can be received
regardless of their order. They can be received even if all of them are not transmitted. They
cannot be received if the irrelevant Block is included.
To execute 1 Performance bulk dump request, designate its corresponding Bulk Header
address.
For the information about “mm” and “nn” shown in the following list, refer to MIDI
PARAMETER CHANGE TABLE (BULK CONTROL) below.
Parameter Block Description
Byte Count Top Address
Dec Hex H M L
SYSTEM System 60 003C 00 00 00
Sequencer 22 0016 00 05 00
MICRO TUNING Table 1 24 0018 00 30 00
: 8 Blocks : : :
Table 8 240018003700
MICRO TUNING
NAME
Table 1 200014005000
: 8 Blocks : : :
Table 8 200014005700
CURVE Bulk Header 0 0000 0E 40 00
Curve
[nn: User Curve No. (0...31)]
37 0025 01 00 00
Bulk Footer 0 0000 0F 40 00
LIVE SET Bulk Header 0 0000 0E 41 00
Live Set Bank Name 20 0014 02 00 00
Live Set Page Name
[p: Page No. (0...15)]
20 0014 03 0p 00
Live Set Page 1-8 Slot Table
[p: Page No. (0...7), s: Slot No. (0...15)]
26 001A 04 ps 00
Live Set Page 9-16 Slot Table
[p: Page No. (0...7), s: Slot No. (0...15)]
26 001A 05 ps 00
Bulk Footer 0 0000 0F 41 00
PERFORMANCE Bulk Header 0 0000 0E mm nn
PERFORMANCE
COMMON
Performance Common 94 005E 30 40 00
Reverb 71 0047 30 41 00
Variation 720048304200
Insertion A for A/D 680044304300
Insertion B for A/D 680044304400
Master EQ 21 0015 30 45 00
Master Effect 72 0048 30 46 00
Arpeggio Common 13 000D 30 47 00
Motion Seq Common Settings
6
0006 30 48 00
Motion Seq AD Part Lane Settings 64 0040 30 49 00
Motion Seq AD Part Lane Sequence
[l: Lane No. (0...3), m: Motion Seq No. (0...7)]
50 0032 30 lm 00
Super Knob Lane Settings 15 0000F 30 4A 00
Super Knob Sequence
[m: Motion Sequence No. (0...7)]
50 0032 30 6m 00
Super Knob Settings 28 001C 30 4B 00
Scene Common 128 0080 30 4C 00
Audition 4 0004 30 4D 00
Audio In Part1 (A/D) 28 001C 30 4E 00
Audio In Part2 (USB) 23 0017 30 4F 00
Assignable Knob Name 128 0080 30 50 00
Common/AD Controller 1 – 13 117 0075 30 51 00
Common/AD Controller 14 – 16 27 001B 30 52 00
PERFORMANCE PART Performance Part
[p: Part No. (0...15)]
121 0079 31 0p 00
Motion Seq Part/Lane Settings
[p: Part No. (0...15)]
64 0040 34 1p 00
Insertion A
[p: Part No. (0...15)]
68 0044 31 2p 00
Insertion B
[p: Part No. (0...15)]
68 0044 31 3p 00
LFO
[p: Part No. (0...15)]
39 0027 31 4p 00
Zone Setting
[p: Part No. (0...15)]
17 0011 31 5p 00
Assignable Knob Name
[p: Part No. (0...15)]
128 0080 37 0p 00
Controller 1 – 13
[p: Part No. (0...15)]
117 0075 38 0p 00
Controller 14 – 16
[p: Part No. (0...15)]
27 001B 38 1p 00
PERFORMANCE PART Arpeggio Part
[p: Part No. (0...15)]
92 005C 31 6p 00
Motion Seq Lane 1 Sequence
[s: Sequence No. (0...7), p: Part No. (0...15)]
50 0032 32 sp 00
Motion Seq Lane 2 Sequence
[s: Sequence No. (0...7), p: Part No. (0...15)]
50 0032 33 sp 00
Motion Seq Lane 3 Sequence
[s: Sequence No. (0...7), p: Part No. (0...15)]
50 0032 34 sp 00
Motion Seq Lane 4 Sequence
[s: Sequence No. (0...7), p: Part No. (0...15)]
50 0032 35 sp 00
Scene Part
[c: Scene No. (0...7), p: Part No. (0...15)]
26 001A 36 cp 00
: Max 16 Parts
NORMAL PART
ELEMENT
Oscillator + Amplitude + Pitch
[p: Part No. (0...15), e: Element No. (0...7)]
103 0067 41 ep 00
Filter + EQ + LFO
[p: Part No. (0...15), e: Element No. (0...7)]
70 0046 42 ep 00
: 8 Blocks, Max 16 Parts
DRUM PART KEY Key
[kk: Key No. (0...72), p: Part No. (0...15)]
47 002F 5p kk 00
: 73 Blocks, Max 16 Parts
FM PART Common
[p: Part No. (0...15)]
86 0056 48 0p 00
FM PART OPERATOR Operator
[o: Operator No. (0...7), p: Part No. (0...15)]
47 002F 49 op 00
: 8 Blocks, Max 16 Parts
Bulk Footer 0 00 0F mm nn
PERFORMANCE PART Bulk Header 0 00 0E 42 nn
PERFORMANCE PART
Only the Part No. p
same as the Part
number specified in
“nn” is available.
Performance Part
[p: Part No. (0...15)]
121 0079 31 0p 00
Motion Seq Part/Lane Settings
[p: Part No. (0...15)]
64 0040 31 1p 00
Insertion A
[p: Part No. (0...15)]
68 0044 31 2p 00
Insertion B
[p: Part No. (0...15)]
68 0044 31 3p 00
LFO
[p: Part No. (0...15)]
39 0027 31 4p 00
Zone Setting
[p: Part No. (0...15)]
17 0011 31 5p 00
Assignable Knob Name
[p: Part No. (0...15)]
128 0080 37 0p 00
Controller 1 – 13
[p: Part No. (0...15)]
117 0075 38 0p 00
Controller 14 – 16
[p: Part No. (0...15)]
27 001B 38 1p 00
Arpeggio Part
[p: Part No. (0...15)]
92 005C 31 6p 00
Motion Seq Lane 1 Sequence
[s: Sequence No. (0...7), p: Part No. (0...15)]
50 0032 32 sp 00
Motion Seq Lane 2 Sequence
[s: Sequence No. (0...7), p: Part No. (0...15)]
50 0032 33 sp 00
Motion Seq Lane 3 Sequence
[s: Sequence No. (0...7), p: Part No. (0...15)]
50 0032 34 sp 00
Motion Seq Lane 4 Sequence
[s: Sequence No. (0...7), p: Part No. (0...15)]
50 0032 35 sp 00
Scene Part
[c: Scene No. (0...7), p: Part No. (0...15)]
26 001A 36 cp 00
NORMAL PART
ELEMENT
Oscillator + Amplitude + Pitch
[p: Part No. (0...15), e: Element No. (0...7)]
103 0067 41 ep 00
Filter + EQ + LFO
[p: Part No. (0...15), e: Element No. (0...7)]
70 0046 42 ep 00
: 8 Blocks
DRUM PART KEY Key
[kk: Key No. (0...72), p: Part No. (0...15)]
4
7
002F 5p kk 00
: 73 Blocks
FM PART Common
[p: Part No. (0...15)]
86 0056 48 0p 00
FM PART OPERATOR Operator
[o: Operator No. (0...7), p: Part No. (0...15)]
47 002F 49 op 00
: 8 Blocks
Bulk Footer 0 00 0F 42 nn
Parameter Block Description
Byte Count Top Address
Dec Hex H M L
Bulk Dump Block