Data List

MONTAGE Data List
149
Effect Parameter List
Category — WAH
[1] VCM AUTO WAH
When the value of Bottom is greater than Top, the sound will not be modulated and only the Bottom
value is available.
[2] VCM TOUCH WAH
When the value of Bottom is greater than Top, the sound will not be modulated and only the Bottom
value is available.
[3] VCM PEDAL WAH
When the value of Bottom is greater than Top, the sound will not be modulated and only the Bottom
value is available.
Category — Lo-Fi
[1] LO-FI
[2] NOISY
[3] DIGITAL TURNTABLE
[4] BIT CRUSHER
No. Parameter Range Value Tbl No.
1 Speed 0.100Hz – 20.00Hz (0 – 254) 22
2 Bottom 0 – 127 (0 – 127)
3 Top 0 – 127 (0 – 127)
4 Resonance Offset -12.0 – +12.0 (40 – 88)
5 LFO Wave Sin, Trp (0 – 1)
6 Type High, Mid, Low Bass (0 – 3)
7 Overdrive 0.0dB – +40.0dB (0 – 80)
8 Output -20.0dB – +10.0dB (24 – 84)
9—
10 —
11 —
12 —
13 —
14 —
15 —
16 —
No. Parameter Range Value Tbl No.
1 Sensitivity 0 – 127 (0 – 127)
2 Bottom 0 – 127 (0 – 127)
3 Top 0 – 127 (0 – 127)
4 Resonance Offset -12.0 – +12.0 (40 – 88)
5 Direction Up, Down (0 – 1)
6 Type High, Mid, Low, Bass (0 – 3)
7 Overdrive 0.0dB – +40.0dB (0 – 80)
8 Output -20.0dB – +10.0dB (24 – 84)
9—
10 —
11 Attack Offset -5 – +5 (59 – 69)
12 —
13 —
14 —
15 —
16 —
No. Parameter Range Value Tbl No.
1 Pedal Control 0 – 127 (0 – 127)
2 Bottom 0 – 127 (0 – 127)
3 Top 0 – 127 (0 – 127)
4 Resonance Offset -12.0 – +12.0 (40 – 88)
5 Direction Up, Down (0 – 1)
6 Type High, Mid, Low, Bass (0 – 3)
7 Overdrive 0.0dB – +40.0dB (0 – 80)
8 Output -20.0dB – +10.0dB (24 – 84)
9—
10 —
11 —
12 —
13 —
14 —
15 —
16 —
No. Parameter Range Value Tbl No.
1 Sampling Frequency Control 44.1 – 344Hz (0 – 127) 12
2 Word Length 1 – 127 (1 – 127)
3 Output Level -6dB – +36dB (0 – 42)
4 Pre-LPF Cutoff Frequency 63Hz – 20.0kHz (10 – 60) 3
5 Filter Type Thru, PowerBass, Radio,
Telephone, Clean, Low
(0 – 5)
6 Pre-LPF Resonance 1.0 – 12.0 (10 – 120)
7 Bit Assign 0 – 6 (0 – 6)
8 Emphasis Off, On (0 – 1)
9—
10 Dry/Wet Balance D63>W – D=W – D<W63 (1 – 127)
11 —
12 —
13 —
14 —
15 Input Mode Mono, Stereo (0 – 1)
16 —
No. Parameter Range Value Tbl No.
1 Mod Depth 0 – 10 (0 – 10)
2 Mod Speed 0 – 127 (0 – 127)
3 Mod Feedback -63 – +63 (1 – 127)
4 Mod Mix Balance 1 – 127 (1 – 127)
5 Drive 0 – 127 (0 – 127)
6 AM Speed 0.00Hz – 39.7Hz (0 – 127) 1
7 AM Depth 0 – 127 (0 – 127)
8 LPF Cutoff Frequency 1.0kHz – 20.0kHz (34 – 60) 3
9 LPF Resonance 1.0 – 12.0 (10 – 120)
10 Dry/Wet Balance D63>W – D=W – D<W63 (1 – 127)
11 EQ Frequency 100Hz – 10.0kHz (14 – 54) 3
12 EQ Gain -12 – +12dB (52 – 76)
13 EQ Width 1.0 – 12.0 (10 – 120)
14 —
15 —
16 —
No. Parameter Range Value Tbl No.
1 Click Density 0 – 5 (0 – 5)
2 Click Level 0 – 127 (0 – 127)
3 Noise Tone 0 – 6 (0 – 6)
4 Noise Mod Speed 0.00Hz – 39.7Hz (0 – 127) 1
5 Noise Mod Depth 0 – 127 (0 – 127)
6 Dry Send to Noise 0 – 127 (0 – 127)
7 Noise LPF Cutoff Frequency 1.0kHz – 20.0kHz (34 – 60) 3
8 Noise LPF Q 1.0 – 12.0 (10 – 120)
9 Noise Level 0 – 127 (0 – 127)
10 —
11 Dry Level 0 – 127 (0 – 127)
12 Dry LPF Cutoff Frequency 1.0kHz – 20.0kHz (34 – 60) 3
13 —
14 —
15 —
16 —
No. Parameter Range Value Tbl No.
1 Sample Rate 0 – 100.00 (0 – 16383)
2 Bit 1 – 16 (1 – 16)
3 Crush Type Soft, Hard (0 – 1)
4 Input Level -19.5dB – +12dB (1 – 127) 47
5 M/S Off, On (0 – 1)
6 Side Sample Rate 0 – 100.00 (0 – 16383)
7 Side Bit 1 – 16 (1 – 16)
8 Sample Rate Link -1.0 – +1.0 (0 – 100)
9 Bit Link -1.0 – +1.0 (0 – 100)
10 Dry/Wet Balance D63>W – D=W – D<W63 (1 – 127)
11 Output Level -19.5dB – +12dB (1 – 127) 47
12 —
13 —
14 —
15 —
16 —