manual

Edit Search Utility Live SetPerformance
MONTAGE Reference Manual
Performance
Home
Motion Control
Overview
Quick Edit
Arpeggio
Motion Seq
Super Knob
Knob Auto
Mixing
Scene
Play / Rec
MIDI
Audio
34
Reference
Edit Part MS (Edit Part Motion Sequencer)
Calls up the Motion Sequencer Lane display (page 81) for Part Edit.
EQ Low Gain (3 band EQ Low Gain)
Determines the level gain for the Low band.
Settings: -12dB – +12dB
EQ Mid Freq (3 band EQ Mid Frequency)
Determines the frequency for the Mid band.
Settings: 139.7Hz – 10.1kHz
EQ Mid Gain (3 band EQ Mid Gain)
Determines the level gain for the Mid band.
Settings: -12dB – +12dB
EQ Mid Q (3 band EQ Mid Q)
Determines the EQ bandwidth of the Mid band.
Settings: 0.7 – 10.3
EQ High Gain (3 band EQ Hi Gain)
Determines the level gain of the High band.
Settings: -12dB – +12dB
Pan
Determines the stereo pan position of the selected Part.
Settings: L63 – C (Center) – R63
Var Send (Variation Send)
Determines the Send level of the signal sent to the Variation effect.
Settings: 0 – 127
Rev Send (Reverb Send)
Determines the Send level of the signal sent to the Reverb effect.
Settings: 0 – 127
Part Clock Swing (Part Swing)
Delays notes on even-numbered beats (backbeats) to produce a swing feel.
• +1 and higher: Delay the Arpeggio notes.
• -1 and lower: Advance the Arpeggio notes.
• 0: Exact timing as set by “Arpeggio/Motion Sequencer Grid” Value, resulting in no swing.
Judicious use of this setting lets you create swing rhythms and triplet feels, such as shuffle and
bounce.
Settings: -120 – +120
Part Clock Unit (Part Unit Multiply)
Adjusts the Arpeggio/Motion Sequencer playback time for the selected Part.
Settings: 50% – 400%, Common
200%: The playback time will be doubled and the tempo is halved.
100%: The normal playback time.
50%: The playback time will be halved and the tempo doubled.
Common: The value set in the Unit Multiply common to the all Parts will be applied.
Part Arp Gate Time (Part Arpeggio Gate Time)
Determines how much the Gate Time (length) of the Arpeggio notes is offset from the original value.
This is the offset value for the Gate Time Rate (page 76) of each Arpeggio Select setting.
Settings: 0% – 200%
Part Arp Velocity (Part Arpeggio Velocity Rate)
Determines how much the velocity of Arpeggio playback is offset from the original value.
This is the offset value for the Velocity Rate (page 76) of each Arpeggio Select setting.
Settings: 0% – 200%