manual

Edit Search Utility Live SetPerformance
Normal Part (AWM2) Drum Part Normal Part (FM-X) Common/Audio
MONTAGE Reference Manual
Normal Part (AWM2) Edit
Common
Part Settings
General
Pitch
Zone Settings
Zone Transmit
Effect
Routing
Ins A
Ins B
EQ
Arpeggio
Common
Individual
Advanced
Motion Seq
Common
Lane
Mod / Control
Part LFO
Control Assign
Receive SW
Element
Osc / Tune
Pitch EG
Filter
Type
Filter EG
Scale
Amplitude
Level / Pan
Amp EG
Scale
Element LFO
Element EQ
All Element
Osc
Balance
98
Reference
Volume
Determines the output volume of the selected Key Bank.
Settings: 0 – 255
Pan
Determines the stereo pan position of the selected Key Bank.
Settings: L63 – C – R63
Tune Coarse (Coarse Tune)
Determines the pitch of the selected Key Bank in semitones.
Settings: -64 – +63
Tune Fine (Fine Tune)
Determines the fine tuning for the pitch of the selected Key Bank.
Settings: -64 – +63
Delete Keybank (Delete Key Bank)
Deletes the selected Key Bank.
Add Keybank (Add Key Bank)
Adds new Key Bank to the selected Waveform.
From the Pitch EG display you can make all time and level settings for the Pitch EG, which determine how
the pitch of the sound changes over time for Oscillators. These can be used to control the change in pitch
from the moment a note is pressed on the keyboard to the moment the sound stops.
The full names of the available parameters are shown in the chart below, as they appear in the display.
Settings: Time: 0 – 127
Level: -128 – +127
Pitch EG
Operation
[PERFORMANCE]  [EDIT]  Part selection  Element selection  [Pitch EG]
Hold Attack Decay1 Decay2 Release
Time
Hold Time Attack Time Decay1 Time Decay2 Time Release Time
Level
Hold Level Attack Level Decay1 Level Decay2 Level Release Level