User Manual

MONTAGE Owner’s Manual

Recording and Playback

6 Press the [R] (Play) button.

If you have set the trigger level to “manual,” recording

will begin immediately right after you press the [R] (Play)

button. While the recording, the [I] (Record) button will

light red and the [R] (Play) button will light green. If you

have set a value between 1 and 127 as the trigger level,

the recording will begin automatically whenever the

playback volume exceeds that level.

7 Play the keyboard.

If you set the trigger level to a value between 1 and 127,

recording will begin automatically whenever the

playback volume exceeds that level.

8 When you have finished playing, press the

[J] (Stop) button.

The recorded audio file will be saved on the selected

device.

Playing an audio file

As described below, the MONTAGE can play audio files

(.wav) from a USB flash memory device, regardless of

whether they have been created by the instrument itself or

come from another source.

1 Connect a USB flash memory device to the

[USB TO DEVICE] terminal of the MONTAGE.

2 Touch the [Play/Rec] tab  [Audio] tab at the

left side of the Performance display.

3 Touch “Audio Name” and then select [Load]

menu at the left side of the screen.

4 Select the source USB flash memory device

and folder.

5 Select the desired file (.wav) on the USB flash

memory device to execute the Load

operation.

1 Audio name

2 Audio volume

3 Audio length

6 Press the [R] (Play) button.

The audio file will begin playing.

7 Move the cursor to “Audio Volume” (2), and

then adjust the playback volume by using the

data dial.

8 Press the [J] (Stop) button to stop playback.

NOTE

Keep in mind that you can also play a selected Performance on

the keyboard during audio playback.