User Manual

ManualsBrandsYamaha ManualsElectronic KeyboardsYamaha Montage6 Synthesizer Workstation

MONTAGE Owner’s Manual

The Utility display provides tools for transferring the entire system setting and data (such as Performances and Live Sets)

between the MONTAGE and an external USB flash memory device connected to the [USB TO DEVICE] terminal.

This section explains how to save/load all the data on the user memory of this instrument as a “User” file.

Saving the settings to a USB flash

memory device

1 Connect a USB flash memory device to the

[USB TO DEVICE] terminal of this instrument.

2 Press the [UTILITY] button to call up the

Utility display, and then touch the [Contents]

tab  [Store/Save] tab in the left of the

display.

3 Set “Content Type” to “User File.”

4 Select the desired directory of the USB flash

memory device.

1 Parent folder

2 Store-destination folder in the USB flash memory

device

3 New store destination

4 Existing files

5 Touch “+” in [Save As New File].

NOTE

To overwrite the existing file, touch the file name.

6 The Text input display appears. Input the file

name to be stored.

For detailed instructions on entering a name, see

“Naming (inputting characters)” in “Basic Operation and

Displays” (page 17).

7 Touch [Done] on the Text input display to

actually execute the Store operation.

NOTE

To overwrite the existing file, select “YES” on the display which

prompts you for confirmation.

Loading the settings from a USB

flash memory device

NOTICE

The Load operation overwrites any data previously existing in

this instrument. Important data should always be saved to a USB

flash memory device connected to the [USB TO DEVICE]

terminal.

1 Connect a USB flash memory device to the

[USB TO DEVICE] terminal of this instrument.

2 Press the [UTILITY] button to call up the

Utility display, and then touch [Contents] tab

 [Load] tab at the left side of the display.

3 Set “Content Type” to “User File.”

4 Select the desired folder of the USB flash

memory device.

5 Select the file (extension: .X7U) of the

memory to execute the Load operation.

1 Source USB flash memory device

2 Source folder in the USB flash memory device

3 Existing files

Saving/Loading Data

Select Content type