User Manual

MONTAGE Supplementary Manual
15
Track
Determines the Track to be erased.
Scene
Determines the Scene to be erased.
Start Measure
Determines the starting measure position at which the Job is applied.
Range: 001 – 257
Start Beat
Determines the starting beat position at which the Job is applied.
Settings: Depends on selected Time Signature
Start Clock
Determines the starting clock position at which the Job is applied.
Settings: Depends on selected Time Signature
End Measure
Determines the ending measure position at which the Job is applied.
Range: 001 – 257
End Beat
Determines the ending beat position at which the Job is applied.
Settings: Depends on selected Time Signature
End Clock
Determines the ending clock position at which the Job is applied.
Settings: Depends on selected Time Signature
Auto Select
When turned on, this enables you to determine the type of Event to be erased using panel controls, such as the Pitch Bend
wheel or Knob.
Settings: Off, On
Event Type
Determines the type of Event to be erased.
Settings: Note, Poly, CC, NRPN, RPN, PC, AfterTouch, PitchBend, SysEx, All
CC Number (Control Change Number)
Displayed when the Event type is set to CC. Determines the Control Change Number to be erased.
Range: Range: All, 1 – 127
System Exclusive
Displayed when the Event type is set to SysEx. Determines the System Exclusive to be erased.
Settings: All, Common Cutoff, Common Resonance, Common FEG Depth, Common Portamento, Common Attack Time, Common Decay Time, Common
Sustain Level, Common Release Time, Common EQ Low Gain, Common EQ Lo Mid Gain, Common EQ Mid Gain, Common EQ Mid Freq,
Common EQ Hi Mid Gain, Common EQ High Gain, Common Pan, Common Var Return, Common Rev Return, Common Swing, Common Unit
Multiply, Common Gate Time, Common Velocity, Common MS Amplitude, Common MS Shape, Common MS Smooth, Common MS Random,
Common Assign Knob 1, Common Assign Knob 2, Common Assign Knob 3, Common Assign Knob 4, Common Assign Knob 5, Common
Assign Knob 6, Common Assign Knob 7, Common Assign Knob 8, Common Super Knob, Part FEG Depth, Part Sustain Level, Part EQ Low
Gain, Part EQ Mid Freq, Part EQ Mid Gain, Part EQ Mid Q, Part EQ High Gain, Part Swing, Part Unit Multiply, Part Gate Time, Part Velocity, Part
MS Amplitude, Part MS Shape, Part MS Smooth, Part MS Random, Element 1 Level, Element 2 Level, Element 3 Level, Element 4 Level,
Element 5 Level, Element 6 Level, Element 7 Level, Element 8 Level, Operator 1 Level, Operator 2 Level, Operator 3 Level, Operator 4 Level,
Operator 5 Level, Operator 6 Level, Operator 7 Level, Operator 8 Level, Drum BD Level, Drum SD Level, Drum HH Close Level, Drum HH
Pedal Level, Drum HH Open Level, Drum Low Tom Level, Drum High Tom Level, Drum Crash Level
NOTE When Common parameters and Super Knob are specified, the System Exclusive is deleted irrespective of the Track settings.