User Manual

MONTAGE Supplementary Manual
49
New Rhythm Pattern function
The Rhythm Pattern function provides a simple way to add a rhythm part to the current Performance.
By combining rhythm patterns and the Envelope Follower, you can modify the patterns even further.
As an example, the following steps show how to add the rhythm pattern “8Z Trance Basics 1” to the Performance “Supertrance,”
and then modify the sound with the Envelope Follower.
Adding a Rhythm Part (simple way)
1 Select the desired Performance for adding the rhythm part.
Select “Supertrance.”
2 Press the [SHIFT] button + the [CONTROL ASSIGN] button.
The Rhythm Pattern display appears.
When all of the parts in Part 1 to 8 are already in use, the message “Part Full” appears and the rhythm pattern cannot be
added.
3 From the Rhythm Pattern List, touch the Rhythm Pattern kit you want to use.
Here, touch “8Z Trance Basics 1.”
A rhythm part is added.
4 Play the keyboard and the rhythm pattern starts playing.
5 Press the [PERFORMANCE (HOME)] button or [EXIT] button to set the Rhythm Pattern.
The Rhythm Pattern display closes.
NOTE You can also touch the HOME icon to confirm the selection.
6 To stop the rhythm pattern, press the [ARP ON/OFF] button or the [J] (Stop) button.
NOTE You can also stop the rhythm pattern by touching the [Arp Hold On] button on the display.
Bank/Favorite Name SearchKit Selection
Mute Sort Switching pages