User Manual
Table Of Contents
- Contents
- New Functions in MONTAGE Version 3.50
- New Functions in MONTAGE Version 3.00
- New Functions in MONTAGE Version 2.50
- New Functions in MONTAGE Version 2.00
- New Functions in MONTAGE Version 1.60
- New Functions in MONTAGE Version 1.50
- New Functions in MONTAGE Version 1.20
- New Functions in MONTAGE Version 1.10
MONTAGE Supplementary Manual
50
Setting the Envelope Follower
Envelope Follower is a feature that extracts the envelope (or amplitude envelope) of a waveform from the input signals, and then
lets you use that envelope as a controller for modifying sounds. For example, by assigning a rhythm pattern to a Part and setting
the Envelope Follower of the Part as a “Source,” the sound of the other Parts are modified accordingly. This is especially useful
for automatic “ducking,” where you want to lower the volume of other instruments while a certain instrument sound is being
played.
1 Touch the [Envelope Follower] tab at the bottom of the Rhythm Pattern display.
The Envelope Follower display appears.
2 Turn the Envelope Follower switch “ON.”
Here, you can play the keyboard to hear the sound with the Envelope Follower enabled.
Envelope Follower tab