User Manual

MONTAGE Supplementary Manual
67
DAW Remote function
You can now control DAW software on your computer from MONTAGE.
The DAW Remote function can be used only when the computer is connected via USB cable. MIDI cables cannot be used.
Setting up the DAW Remote function
Refer to the Owner’s Manual for use with a computer.
[Remote]  Call up the setting display of DAW Remote function in [Settings]  Set the DAW type to your particular DAW
software.
This section explains the specific operations for each DAW software type.
NOTE Once the connection between the computer and the MONTAGE is lost, the DAW software may occasionally fail to recognize MONTAGE,
even when reconnecting while power is on. If this happens, reconnect the computer and the MONTAGE, then reboot the DAW software.
IMPORTANT
Depending on the version of your DAW software, the setting procedure may differ from the following instructions, or the setup may not
be successful. For details, refer to the owner’s manual of the DAW software.
 Cubase
1 [Device]/[Studio]  [Device Settings...]/[Studio Setup...] to call up the dialog.
2 [MIDI]  select [MIDI Port Setup]  uncheck the [In All MIDI Inputs] field of MONTAGE-2 or MONTAGE Port 2.
3 Press the [+] button on the top left of the dialog, then, select [Mackie Control] from the list.
4 [Remote Devices]  select [Mackie Control].
5 Set the [MIDI Input] and the [MIDI Output] to MONTAGE-2 or MONTAGE Port2.
6 (Optional) Assign desired functions to [F1] – [F8] of [User Commands].
 Logic Pro
1 [Logic Pro X]  [Preferences]  [Advanced]  checkmark [Show Advanced Tools].
2 [Logic Pro X]  [Control Surfaces]  [Setup…] to call up the dialog.
3 [New]  [Install…] to select [Mackie Control] of [Mackie Designs].
4 Set the [Output Port] and the [Input Port] of [Mackie Control] to MONTAGE Port2.
5 (Optional) [Logic Pro X]  [Control Surfaces]  [Controller Assignments...] to set [Zone] to [Control Surface:
Mackie Control] and assign functions to [Control] [F1] – [F8].
 Ableton Live
1 [Live]  [Preferences…] to open the dialog.
2 Select the [Link/MIDI] tab.
3 Select [MackieControl] for the [Control Surface].
4 Set the [Input] and the [Output] to MONTAGE-2 or MONTAGE Port2.
5 (Optional) Assign desired functions to [F1] – [F8] by setting the operation of MIDI notes F#2 – C#3 in the [Edit
MIDI Map] of the [Options] menu.
 Pro Tools
1 [Setup]  [Peripherals…] to open the dialog.
2 Select the [MIDI Controllers] tab.
3 Set the Type to [HUI], and set the [Receive From] and [Send To] to MONTAGE-2 or MONTAGE Port2 of
[Predefined].
Settings on MONTAGE
Setting up DAW software