User Manual

Edit Search Utility Live SetPerformance
Normal Part (AWM2) Drum Part Normal Part (FM-X) Common/Audio
MONTAGE Reference Manual
Normal Part (AWM2) Edit
Common
Part Settings
General
Pitch
Zone Settings
Zone Transmit
Effect
Routing
Ins A
Ins B
EQ
Arpeggio
Common
Individual
Advanced
Motion Seq
Common
Lane
Mod / Control
Part LFO
Control Assign
Receive SW
Element
Osc / Tune
Pitch EG
Filter
Type
Filter EG
Scale
Amplitude
Level / Pan
Amp EG
Scale
Element LFO
Element EQ
All Element
Osc
Balance
102
Reference
BEF
BEF12: -12 dB/oct Band-Eliminate Filter.
BEF6: -6 dB/oct Band-Eliminate Filter.
DualLPF: Two -12 dB/oct Low-Pass Filters connected in parallel. You can edit the distance between the two Cutoff
Frequencies.
DualHPF: Two -12 dB/oct High-Pass Filters connected in parallel.
DualBPF: Two -6 dB/oct Band-Pass Filters connected in parallel.
DualBEF: Two -6 dB/oct Band-Eliminate Filters connected in serial.
LPF12+BPF6: A combination of a -12 dB/oct Low-Pass Filter and a -6 dB/oct Band-Pass Filter connected in
parallel. You can edit the distance between the two Cutoff Frequencies.
Cutoff (Cutoff Frequency)
Determines the cutoff frequency for the Filter. This is used as the basic frequency for the selected Filter
Type.
Settings: 0 – 255
Cutoff/Vel (Cutoff Velocity Sensitivity)
Determines how the Cutoff Frequency responds to Velocity, or the strength with which you play notes.
Settings: -64 – +63
Positive values: The more strongly you play the keyboard, the more the Cutoff Frequency rises.
Negative values: The more softly you play the keyboard, the more the Cutoff Frequency rises.
0: The Cutoff Frequency does not change, regardless of the Velocity.
Center Frequency
Gain
Frequency
Frequencies that are “passed” by the filter
Gain
Frequency
Distance
Lower Cutoff Frequency is set directly on the display
(and Higher Cutoff Frequency is automatically set)
Gain
Frequency
Distance
Lower Cutoff Frequency is set directly on the display
(and Higher Cutoff Frequency is automatically set)
Gain
Frequency
Distance
Lower Cutoff Frequency is set directly on the display
(and Higher Cutoff Frequency is automatically set)