User Manual

Edit Search Utility Live SetPerformance
Normal Part (AWM2) Drum Part Normal Part (FM-X) Common/Audio
MONTAGE Reference Manual
Normal Part (AWM2) Edit
Common
Part Settings
General
Pitch
Zone Settings
Zone Transmit
Effect
Routing
Ins A
Ins B
EQ
Arpeggio
Common
Individual
Advanced
Motion Seq
Common
Lane
Mod / Control
Part LFO
Control Assign
Receive SW
Element
Osc / Tune
Pitch EG
Filter
Type
Filter EG
Scale
Amplitude
Level / Pan
Amp EG
Scale
Element LFO
Element EQ
All Element
Osc
Balance
105
Reference
From the Filter EG display you can make all time and level settings for the Filter EG, which determine how
the sound changes over time for Elements. These can be used to control the change the sound from the
moment a note is pressed on the keyboard to the moment the sound stops.
The full names of the available parameters are shown in the chart below, as they appear in the display.
Settings: Time: 0 – 127
Level: -128 – +127
Time/Key (FEG Time Key Follow Sensitivity)
Determines the degree to which the notes (specifically, their position or octave range) affect the Filter EG
Times. The basic speed of change for the FEG is at the note specified in Center Key (below).
Settings: -64 – +63
Positive values: High notes result in a high FEG transition speed while low notes result in a slow speed.
Negative values: High notes result in a slow FEG transition speed while low notes result in a high speed.
0: The FEG transition speed does not change, regardless of the played note.
Center Key (FEG Time Key Follow Sensitivity Center Key)
Determines the central note for the “Time/Key” parameter above.
Settings: C-2 – G8
Filter EG
Operation
[PERFORMANCE]  [EDIT]  Part selection  Element selection  [Filter]  [Filter EG]
Hold Attack Decay1 Decay2 Release
Time
Hold Time Attack Time Decay1 Time Decay2 Time Release Time
Level
Hold Level Attack Level Decay1 Level Decay2 Level Release Level