User Manual

Edit Search Utility Live SetPerformance
Normal Part (AWM2) Drum Part Normal Part (FM-X) Common/Audio
MONTAGE Reference Manual
Normal Part (AWM2) Edit
Common
Part Settings
General
Pitch
Zone Settings
Zone Transmit
Effect
Routing
Ins A
Ins B
EQ
Arpeggio
Common
Individual
Advanced
Motion Seq
Common
Lane
Mod / Control
Part LFO
Control Assign
Receive SW
Element
Osc / Tune
Pitch EG
Filter
Type
Filter EG
Scale
Amplitude
Level / Pan
Amp EG
Scale
Element LFO
Element EQ
All Element
Osc
Balance
108
Reference
From the Level/Pan display you can make Level and Pan settings for each individual Element.
Level
Determines the output level of the Element.
Settings: 0 – 127
Level/Vel (Level Velocity Sensitivity)
Offset (Level Velocity Sensitivity Offset)
Curve (Level Velocity Sensitivity Curve)
Determines how the actual Velocity will be generated according to the Velocity (strength) with which you
play notes on the keyboard. The Offset parameter raises or lowers the level specified by the “Level/Vel.”
If the result is higher than 127, the velocity is set to 127. The Curve parameter lets you select from five
different preset velocity curves (graphically indicated in the display) that determine how velocity affects the
actual Velocity. In the illustrations below, the vertical axis indicates the actual resulting Velocity and the
horizontal axis indicates Velocity with which you play notes.
Settings: Level/Vel: -64 – +63
Positive values: The more strongly you play the keyboard, the more the output rises.
Negative values: The more softly you play the keyboard, the more the output rises.
0: The output level does not change.
Settings: Offset: 0 – 127
A: Level Velocity Sensitivity = 0
B: Level Velocity Sensitivity = 32
C: Level Velocity Sensitivity = 64
X: Velocity with which you play a note
Y: Actual resulting velocity (affecting the tone generator)
Amplitude
Level/Pan
Operation
[PERFORMANCE]  [EDIT]  Part selection  Element selection  [Amplitude]  [Level/Pan]
064
127
127
A
B
X
Y
C
064
127
127
A
B
X
Y
C
064
127
127
A
B
X
Y
C
Level Velocity Sensitivity Offset = 0 Level Velocity Sensitivity Offset = 64 Level Velocity Sensitivity Offset = 96