User Manual

Edit Search Utility Live SetPerformance
Normal Part (AWM2) Drum Part Normal Part (FM-X) Common/Audio
MONTAGE Reference Manual
Normal Part (AWM2) Edit
Common
Part Settings
General
Pitch
Zone Settings
Zone Transmit
Effect
Routing
Ins A
Ins B
EQ
Arpeggio
Common
Individual
Advanced
Motion Seq
Common
Lane
Mod / Control
Part LFO
Control Assign
Receive SW
Element
Osc / Tune
Pitch EG
Filter
Type
Filter EG
Scale
Amplitude
Level / Pan
Amp EG
Scale
Element LFO
Element EQ
All Element
Osc
Balance
113
Reference
From the Element LFO display you can make LFO related setting for each Element.
The Low-Frequency Oscillator (LFO) unit of the Element generates a low frequency signal. The signal from
the LFO can be used to modulate the pitch, filter, and amplitude.
LFO Wave
Selects the LFO waveform that is used to vary the sound.
Settings: Saw, Triangle, Square
Speed (LFO Speed)
Adjusts the speed (frequency) of LFO variation. The larger the setting, the faster the speed.
Settings: 0 – 63
Key On Reset (LFO Key On Reset)
Determines whether or not the LFO is reset each time a note is played.
Settings: Off, On
Delay (LFO Delay Time)
Determines the delay time between the moment that a Note On message is received and the moment the
LFO comes into effect.
Settings: 0 – 127
Fade In (LFO Fade In Time)
Determines the amount of time for the LFO effect to fade in (after the “Delay” time has elapsed).
Settings: 0 – 127
Element LFO
Operation
[PERFORMANCE]  [EDIT]  Part selection  Element selection  [Element LFO]
Saw (Sawtooth wave) Triangle (Triangle wave) Square (Square wave)
On
Time
Key on
Off
Time
Key on