User Manual

Edit Search Utility Live SetPerformance
Normal Part (AWM2) Drum Part Normal Part (FM-X) Common/Audio
MONTAGE Reference Manual
Normal Part (FM-X) Edit
Common
Part Settings
General
Algorithm
Zone Settings
Zone Transmit
Pitch / Filter
Pitch
PEG/Scale
Filter Type
Filter EG
Filter Scale
Effect
Routing
Ins A
Ins B
EQ
Arpeggio
Common
Individual
Advanced
Motion Seq
Common
Lane
Mod / Control
Part LFO
2nd LFO
Control Assign
Receive SW
Operator
Form / Freq
Level
137
Reference
Var Send (Variation Send)
Determines the Send level of the signal sent from Insertion Effect A/B to the Variation effect.
Settings: 0 – 127
Part Output (Part Output Select)
Determines the specific audio output.
Settings: MainL&R, AsgnL&R, USB Stereo, AsgnL, AsgnR, USB1 – 30, Off
MainL&R: Outputs in stereo (two channels) to the OUTPUT [L/MONO]/[R] jacks.
AsgnL&R: Outputs in stereo (two channels) to the ASSIGNABLE OUTPUT [L]/[R] jacks.
USB1&2…USB29&30: Outputs in stereo (Channels 1&2 – 29&30) to the [USB TO HOST] terminal.
AsgnL: Outputs in mono (one channel) to the ASSIGNABLE OUTPUT [L] jack.
AsgnR: Outputs in mono (one channel) to the ASSIGNABLE OUTPUT [R] jack.
USB1 – 30: Outputs in mono (Channels 1 – 30) to the [USB TO HOST] terminal.
Off: No audio signal for the Part is output.
Same as the Element Common Edit parameters for Normal Parts (AWM2) (page 69).
Same as the Element Common Edit parameters for Normal Parts (AWM2) (page 70).
Same as the Element Common Edit parameters for Normal Parts (AWM2) (page 73).
Same as the Element Common Edit parameters for Normal Parts (AWM2) (page 76).
Same as the Element Common Edit parameters for Normal Parts (AWM2) (page 77).
Same as the Element Common Edit parameters for Normal Parts (AWM2) (page 78).
Same as the Element Common Edit parameters for Normal Parts (AWM2) (page 81).
Ins A (Insertion Effect A)
Ins B (Insertion Effect B)
EQ (Part Equalizer)
Arpeggio
Common
Individual
Advanced
Motion Seq (Motion Sequencer)
Common
Lane