User Manual

Edit Search Utility Live SetPerformance
Normal Part (AWM2) Drum Part Normal Part (FM-X) Common/Audio
MONTAGE Reference Manual
Normal Part (FM-X) Edit
Common
Part Settings
General
Algorithm
Zone Settings
Zone Transmit
Pitch / Filter
Pitch
PEG/Scale
Filter Type
Filter EG
Filter Scale
Effect
Routing
Ins A
Ins B
EQ
Arpeggio
Common
Individual
Advanced
Motion Seq
Common
Lane
Mod / Control
Part LFO
2nd LFO
Control Assign
Receive SW
Operator
Form / Freq
Level
141
Reference
Operator Edit (Operator)
From the Form/Frequency display you can make all the waveform and frequency settings for Operators.
The full names of the available parameters are shown in the chart below, as they appear in the display.
Settings: Time: 0 – 99
Level: -50 – +50
Spectral (Spectral Form)
Determines the “spectral form” of the selected Operator.
Settings: Sine, All 1, All 2, Odd 1, Odd 2, Res 1, Res 2
Skirt (Spectral Skirt)
Determines the spread of the “skirt” at the bottom of the formant harmonics curve. Higher values produce
a wider skirt and smaller values produce a narrower skirt. This is not available when “Spectral” is set to
“Sine.”
Settings: 0 – 7
Resonance (Spectral Resonance)
Determines the degree to which velocity affects the Resonance of the Spectral Form. The center frequency
moves to higher frequencies, letting you create a special resonance in the sound. This is active only when
“Spectral” is set to “Res 1” or “Res 2.”
Settings: 0 – 99
Form/Freq (Form/Frequency)
Operation
[PERFORMANCE]  [EDIT]  Part selection  Operator selection  [Form/Freq]
Initial Attack Decay
Time
– Attack Time Decay Time
Level
Initial Level Attack Level –