User Manual

Edit Search Utility Live SetPerformance
Normal Part (AWM2) Drum Part Normal Part (FM-X) Common/Audio
MONTAGE Reference Manual
Common/Audio Edit
Common/Audio
General
Audio In
Mixing
Routing
Ins A
Ins B
EQ
Motion Seq
Common
Lane
Control
Control Assign
Control Number
Effect
Routing
Variation
Reverb
Master FX
Master EQ
146
Reference
Rev Return (Reverb Return)
Determines the return level of the Reverb effect.
Settings: 0 – 127
Audition Phrase Number
Determines the Audition Phrase Number. You can hear a sample of the selected Performance sounds that
is called “Audition phrase.” The best matching Audition Phrase is assigned to each Preset Performance in
advance.
Settings: 1 – 850
Note Shift (Audition Phrase Note Shift)
Determines the pitch (key transpose) setting for the Audition Phrase in semitones.
Settings: -24semi – +24semi
Velocity Shift (Audition Phrase Velocity Shift)
Determines the velocity of the Audition Phrase.
Settings: -63 – +63
Portamento Master SW (Portamento Master Switch)
Determines whether Portamento is applied to the Part or not when the “Portamento Part SW” is set to on for
the Part.
Settings: Off, On
Portamento Time
Determines the pitch transition time or rate when Portamento is applied.
Settings: -64 – +63
RB Mode (Ribbon Controller Mode)
Determines how the Ribbon Controller responds when released.
Settings: Hold, Reset
Hold: When set to Hold, releasing your finger from the Ribbon Controller maintains the value at the last point of
contact.
Reset: When set to Reset, releasing your finger from the Ribbon Controller automatically returns the value to the
center.
Assign 1 Mode/Assign 2 Mode (Assignable Switch 1 Mode/Assignable Switch 2 Mode)
Determines whether the [ASSIGN 1] and [ASSIGN 2] buttons functions as a latch type or momentary type.
Settings: Latch, Momentary
Latch: When set to “Latch,” pressing the button alternates the status between on and off.
Momentary: When set to “Momentary,” pressing/holding the button turns on and releasing the button turns off.
MS Hold Mode (Motion Sequencer Hold Mode)
Determines how the [MOTION SEQ HOLD] button responds when pressed.
Settings: Latch, Momentary
Latch: When set to “Latch,” pressing the button alternates the status between on and off.
Momentary: When set to “Momentary,” pressing/holding the button turns on and releasing the button turns off.