User Manual

Edit Search Utility Live SetPerformance
Normal Part (AWM2) Drum Part Normal Part (FM-X) Common/Audio
MONTAGE Reference Manual
Common/Audio Edit
Common/Audio
General
Audio In
Mixing
Routing
Ins A
Ins B
EQ
Motion Seq
Common
Lane
Control
Control Assign
Control Number
Effect
Routing
Variation
Reverb
Master FX
Master EQ
147
Reference
From the Mixing display you can adjust the volume settings of the Audio Part (the input signal from the A/D
INPUT [L/MONO]/[R] jacks) and the Digital Part (the input signal from the [USB TO HOST] terminal*).
* Only the sound of the Port which, among all Device Ports, is set to “Digital L/R.”
A/D In Input Mode/Digital In Input Mode (A/D Part Input Mode/Digital Part Input Mode)
Determines the signal configuration for the A/D Part/Digital Part, or how the signal or signals are routed
(stereo or mono).
Settings: L Mono, R Mono, L+R Mono, Stereo
L Mono: Only the L channel is used.
R Mono: Only the R channel is used.
L+R Mono: The L and R channels are mixed and processed in mono.
Stereo: Both the L and R channels are used.
NOTE The sound input only from the [L/MONO] channel is processed in mono.
Volume (A/D Part Volume/Digital Part Volume)
Determines the output level of the A/D Part/Digital Part.
Settings: 0 – 127
Pan (A/D Part Pan/Digital Part Pan)
Determines the stereo pan position of the A/D Part/Digital Part.
Settings: L63 – C – R63
Dry Level (A/D Part Dry Level/Digital Part Dry Level)
Determines the level of the A/D Part/Digital Part which has not been processed with the System Effect. This
is available only when “Part Output” is set to “MainL&R.”
Settings: 0 – 127
Var Send (A/D Part Variation Send / Digital Part Variation Send)
Determines the Send level of the Audio Part/Digital Part signal sent to the Variation effect. This is available
only when “Part Output” is set to “MainL&R.”
Settings: 0 – 127
Audio In
Mixing
Operation
[PERFORMANCE]  [EDIT]  PART [COMMON]  [Audio In]  [Mixing]