User Manual

Edit Search Utility Live SetPerformance
MONTAGE Reference Manual
Uitlity
Settings
Sound
Quick Setup
Audio I/O
MIDI I/O
Advanced
System
Contents
Load
Store / Save
Data Utility
Tempo Settings
Effect Switch
169
Reference
Assign L&R (Assign L&R Output Gain)
Determines the output gain of the ASSIGNABLE OUTPUT (BALANCED) [L]/[R] jacks.
Settings: -6dB, +0dB, +6dB, +12dB
USB Main (USB Main L&R Output Gain)
Determines the output gain of the Main L&R channel of the [USB TO HOST] terminal.
Settings: -6dB, +0dB, +6dB, +12dB
USB 1-30 (USB 1 – 30 Output Gain)
Determines the output gain of 1 – 30 channels of the [USB TO HOST] terminal.
Settings: -6dB, +0dB, +6dB, +12dB
Direct Monitor (Direct Monitor Switch)
Determines whether or not the audio signal which is output to the external device via the “Main L&R (USB
Out)” or “USB 1-30” channels also sounds from this instrument (Direct Monitoring). When this is set to “on,”
the audio signal which is output via the “Main L&R (USB Out)” or “USB 1-30” channels is also output to the
OUTPUT (BALANCED) [L/MONO]/[R] jacks and [PHONES] jack. When the external device is not
connected via USB cable, the Direct Monitor Switch is automatically turned on.
Settings: Off, On
From the MIDI I/O display you can set parameters related to MIDI Input and Output.
MIDI IN/OUT
Determines which physical output/input terminal(s) will be used for transmitting/receiving MIDI data.
Settings: MIDI, USB
NOTE The two types of terminals above cannot be used at the same time. Only one of them can be used to transmit/
receive MIDI data.
Local Control
This determines whether or not the tone generator of the instrument responds to your keyboard playing.
Normally, this should be set to “on” — since you’ll want to hear the sound of the instrument as you play it.
Even if this is set to “off,” the data will be transmitted via MIDI. Also, the internal tone generator block will
respond to messages received via MIDI.
Settings: Off, On
MIDI I/O
Operation
[UTILITY] [Settings] [MIDI I/O]