User Manual

Edit Search Utility Live SetPerformance
MONTAGE Reference Manual
Performance
Home
Motion Control
Overview
Quick Edit
Arpeggio
Motion Seq
Super Knob
Knob Auto
Mixing
Scene
Play / Rec
MIDI
Audio
56
Reference
Record Type
Determines the Recording Type. This parameter is not available for the first recording.
Settings: Replace, Overdub, Punch
Replace: You can use this method when you want to overwrite an already recorded Track with new data in real time.
The original data will be erased.
Overdub: You can use this method when you want to add more data to a Track that already contains data.
Previously recorded data will be maintained.
Punch: You can use this method when you want to overwrite data to a specified range of a Track that already
contains data. It allows you to overwrite the already recorded data from the starting point to the ending point
(measure/beat) that was specified before recording.
Punch In
Determines the starting point (measure and beat) for recording. This parameter is available only when
“punch” is selected for “Record Type.”
Punch Out
Determines the ending point (measure and beat) for recording. This parameter is available only when
“punch” is selected for “Record Type.”
NOTE For details about the Punch In/Out setting, see the Owner’s Manual.
Undo
The Undo Job cancels the changes you made in your most recent recording session, restoring the data to
its previous state.
Redo
Redo is available only after using Undo, and lets you restore the changes you made before undoing them.
From the Audio display you can record your performance on the instrument as WAV format (44.1-kHz, 24-
bit, stereo) audio files to a USB flash memory device. It is possible to record continuously for up to 74
minutes (assuming that the USB storage device has sufficient free memory).
 Playback and Playback Standby
Audio Name
Indicates the name of the selected Audio file.
Audio
Operation
[PERFORMANCE]  [Play/Rec]  [Audio]
Current play position in the
entire audio data
Level meter