User Manual
Edit Search Utility Live SetPerformance
Normal Part (AWM2) Drum Part Normal Part (FM-X) Common/Audio
MONTAGE Reference Manual
Normal Part (AWM2) Edit
Common
Part Settings
General
Pitch
Zone Settings
Zone Transmit
Effect
Routing
Ins A
Ins B
EQ
Arpeggio
Common
Individual
Advanced
Motion Seq
Common
Lane
Mod / Control
Part LFO
Control Assign
Receive SW
Element
Osc / Tune
Pitch EG
Filter
Type
Filter EG
Scale
Amplitude
Level / Pan
Amp EG
Scale
Element LFO
Element EQ
All Element
Osc
Balance
60
Reference
Velocity Depth (Velocity Sensitivity Depth)
Determines the degree to which the resulting volume of the
tone generator responds to your playing strength. The higher
the value, the more the volume changes in response to your
playing strength (as shown below).
Settings: 0 – 127
Velocity Offset (Velocity Sensitivity Offset)
Determines the amount by which played velocities are adjusted for the actual resulting velocity effect. This
lets you raise or lower all velocities based on this setting value—allowing you to automatically compensate
for playing too strongly or too softly.
Settings: 0 – 127
From the Pitch display you can set Pitch-related parameters for the Part.
Portamento Master SW (Portamento Master Switch)
Portamento is used to create a smooth transition in pitch from the first note played on the keyboard to the
next. The Portamento Master Switch determines whether Portamento is applied to the entire Performance
or not.
Settings: Off, On
Pitch
Operation
[PERFORMANCE] [EDIT] Part selection ELEMENT/OPERATOR [COMMON]
[Part Settings] [Pitch]
127
0
127
When Offset (below) is set to 64:
Actual resulting
velocity
(affecting the
tone generator)
Velocity with which you play a note
Depth=127
Depth=64
Depth=32
Depth=0
127
012764
127
64
127
0
12764
127
0
Velocity with which you play a note Velocity with which you play a noteVelocity with which you play a note
Actual
resulting
velocity
(affecting
the tone
generator)
Actual
resulting
velocity
(affecting
the tone
generator)
Actual
resulting
velocity
(affecting
the tone
generator)
When Depth (above) = 64
and Offset = 64
When Depth (above) = 64
and Offset = 96
When Depth (above) = 64
and Offset = 32