User Manual

Edit Search Utility Live SetPerformance
Normal Part (AWM2) Drum Part Normal Part (FM-X) Common/Audio
MONTAGE Reference Manual
Normal Part (AWM2) Edit
Common
Part Settings
General
Pitch
Zone Settings
Zone Transmit
Effect
Routing
Ins A
Ins B
EQ
Arpeggio
Common
Individual
Advanced
Motion Seq
Common
Lane
Mod / Control
Part LFO
Control Assign
Receive SW
Element
Osc / Tune
Pitch EG
Filter
Type
Filter EG
Scale
Amplitude
Level / Pan
Amp EG
Scale
Element LFO
Element EQ
All Element
Osc
Balance
66
Reference
Pan (Transmit Pan)
Determines whether Pan messages are transmitted to the external tone generator or not.
This is not available when the Transmit Control Change is set to off.
Settings: Off, On
MW (Transmit Modulation Wheel)
Determines whether MIDI messages generated by using the Modulation Wheel are transmitted to the
external tone generator or not.
This is not available when the Transmit Control Change is set to off.
Settings: Off, On
Sustain (Transmit Sustain)
Determines whether Sustain messages are transmitted to the external tone generator or not.
This is not available when the Transmit Control Change is set to off.
Settings: Off, On
FC1/FC2 (Transmit Fool Controller)
Determines whether MIDI messages generated by pressing the optional Foot Controller are transmitted to
the external tone generator or not.
This is not available when the Transmit Control Change is set to off.
Settings: Off, On
FS (Transmit Foot Switch)
Determines whether MIDI messages generated by pressing the optional Foot Switch are transmitted to the
external tone generator or not.
This is not available when the Transmit Control Change is set to off.
Settings: Off, On
A. SW1/A. SW2 (Transmit Assignable Switch)
Determines whether MIDI messages generated by pressing the [ASSIGN 1] and [ASSIGN 2] buttons are
transmitted to the external tone generator or not.
This is not available when the Transmit Control Change is set to off.
Settings: Off, On
MS Hold (Transmit Motion Sequencer Hold)
Determines whether MIDI messages generated by pressing the [MOTION SEQ HOLD] button are
transmitted to the external tone generator or not.
This is not available when the Transmit Control Change is set to off.
Settings: Off, On
MS Trigger (Transmit Motion Sequencer Trigger)
Determines whether MIDI messages generated by pressing the [MOTION SEQ TRIGGER] button are
transmitted to the external tone generator or not.
This is not available when the Transmit Control Change is set to off.
Settings: Off, On
RB (Transmit Ribbon Controller)
Determines whether MIDI messages generated by using the Ribbon Controller are transmitted to the
external tone generator or not.
This is not available when the Transmit Control Change is set to off.
Settings: Off, On
BC (Transmit Breath Controller)
Determines whether MIDI messages for Breath Controller are transmitted to the external tone generator or
not.
This is not available when the Transmit Control Change is set to off.
Settings: Off, On
A.Knob1 – 8 (Transmit Assignable Knob)
Determines whether MIDI messages generated by using the Assignable Knobs 1 – 8 are transmitted to the
external tone generator or not.
This is not available when the Transmit Control Change is set to off.
Settings: Off, On