User Manual

Edit Search Utility Live SetPerformance
Normal Part (AWM2) Drum Part Normal Part (FM-X) Common/Audio
MONTAGE Reference Manual
Normal Part (AWM2) Edit
Common
Part Settings
General
Pitch
Zone Settings
Zone Transmit
Effect
Routing
Ins A
Ins B
EQ
Arpeggio
Common
Individual
Advanced
Motion Seq
Common
Lane
Mod / Control
Part LFO
Control Assign
Receive SW
Element
Osc / Tune
Pitch EG
Filter
Type
Filter EG
Scale
Amplitude
Level / Pan
Amp EG
Scale
Element LFO
Element EQ
All Element
Osc
Balance
69
Reference
Release (Envelope Follower Release)
Determines the release time of the Envelope Follower.
Settings: 10ms – 680ms
Input Level
Indicates the Input Level of the signal from the Input Source set in “Part.”
Envelope Follower Output
Indicates the Output Level of the Envelope Follower.
From the Insertion Effect A/Insertion Effect B display you can set parameters related to Insertion Effect.
Insertion FX Switch (Insertion Effect Switch)
Determines whether the selected Insertion Effect is active or not.
Category (Effect Category)
Type (Effect Type)
Determines the category and type for the selected Insertion Effect.
Settings: For details on the editable Effect categories and types, see the Data List PDF document. Also, for details on the
description for each Effect type, see the Synthesizer Parameter Manual PDF document.
Preset
Allows you to call up pre-programmed settings for each Effect type, designed to be used for specific
applications and situations. You can change how the sound is affected by the selected pre-programmed
settings.
Settings: For a list of all Preset Effect types, see the Data List PDF document.
Ins A (Insertion Effect A)
Ins B (Insertion Effect B)
Operation
[PERFORMANCE]  [EDIT]  Part selection  ELEMENT/OPERATOR [COMMON]  [Effect]
[Ins A] / [Ins B]
Insertion FX Switch
Effect Parameter