User Manual
Edit Search Utility Live SetPerformance
Normal Part (AWM2) Drum Part Normal Part (FM-X) Common/Audio
MONTAGE Reference Manual
Normal Part (AWM2) Edit
Common
Part Settings
General
Pitch
Zone Settings
Zone Transmit
Effect
Routing
Ins A
Ins B
EQ
Arpeggio
Common
Individual
Advanced
Motion Seq
Common
Lane
Mod / Control
Part LFO
Control Assign
Receive SW
Element
Osc / Tune
Pitch EG
Filter
Type
Filter EG
Scale
Amplitude
Level / Pan
Amp EG
Scale
Element LFO
Element EQ
All Element
Osc
Balance
78
Reference
Random SFX Key On Ctrl (Random SFX Key On Control)
When this is set to “on,” the Random SFX sound is played at the velocity generated by the playing of each
note. When this is set to “off,” a special Random SFX sound is played at a pre-programmed velocity.
Settings: off, on
Velocity Mode
Adjusts the velocity of the Arpeggio notes.
Settings: Original, Thru
Original: The Arpeggio plays back at the Velocity set for the Arpeggio Type.
Thru: The Arpeggio plays back according to the Velocity of your playing.
Trigger Mode
When this is set to “Gate,” pressing the note starts Arpeggio playback and releasing the note stops it.
When this is set to “Toggle,” pressing the note starts/stops Arpeggio playback and releasing the note does
not affect Arpeggio playback.
Settings: Gate, Toggle
From the Common display you can set the parameters related to Motion Sequencer for the Part.
Common Clock Swing (Common Swing)
Determines the Swing of the Arpeggio/Motion Sequencer for the entire Performance. This is the offset
value for the Swing of the Arpeggio/Motion Sequencer for each Part.
Settings: -120 – +120
Common Clock Unit (Common Unit Multiply)
Adjusts the Arpeggio/Motion Sequencer playback time for the entire Performance.
This parameter is applied to the Part when the Unit Multiply parameter for Arpeggio/Motion Sequencer of
the Part is set to “Common.”
By using this parameter, you can create a different Arpeggio/Motion Sequencer type from the original one.
Settings: 50% – 400%
200%: The playback time will be doubled and the tempo is halved.
100%: The normal playback time.
50%: The playback time will be halved and the tempo doubled.
Motion Seq (Motion Sequencer)
Common
Operation
[PERFORMANCE] [EDIT] Part selection ELEMENT/OPERATOR [COMMON] [Motion Seq]
[Common]